newbe question about magazines
-
jaja
- B Poster

- Posts: 85
- Joined: Sun Dec 01, 2013 10:05 am
newbe question about magazines
How many 5-shot magazines do I need if I want to compete in the Pennsylvania state small-bore rifle silhouette championships or the NRA small-bore rifle national championships? Also, where would I get some magazines for an Anschutz 1808 MSR. One final question: Is there a dry-fire firing pin available for my rifle so that I could work out whatever flaws I might have in my shooting form? Thanks in advance for your help. I just want to be prepared for a new competitive sport this spring.
- ppkny
- Master Poster

- Posts: 1003
- Joined: Sat Aug 05, 2006 7:07 am
- Location: Endicott, NY
Re: newbe question about magazines
jaja, I would say a min of 2 and a max of whatever you want to buy. You'll get time in-between each set of 5 to reload your mag (15sec) and if you want you can have both magazines loaded before you start your string of 10. BUT....you can only have one magazine on the ready station before each 5 shot string.
It's different with HP silhouette. You have to load your magazines always at the ready command. There are some other caveats, but are you only interested in SB?
ppkny
It's different with HP silhouette. You have to load your magazines always at the ready command. There are some other caveats, but are you only interested in SB?
ppkny
-
curmudgeon
- B Poster

- Posts: 78
- Joined: Sat Oct 26, 2013 8:46 pm
- Location: Vancouver Island, Canada
Re: newbe question about magazines
I've just started shooting Silhouette, and purchased two, 5-shot ANSCHÜTZ magazines from Nordic Marksman - great service and very quick shipping.jaja wrote:How many 5-shot magazines do I need if I want to compete in the Pennsylvania state small-bore rifle silhouette championships or the NRA small-bore rifle national championships? Also, where would I get some magazines for an Anschutz 1808 MSR. One final question: Is there a dry-fire firing pin available for my rifle so that I could work out whatever flaws I might have in my shooting form? Thanks in advance for your help. I just want to be prepared for a new competitive sport this spring.
I'm glad to have two magazines, but one would do - there is plenty of time to reload between banks.
-
jaja
- B Poster

- Posts: 85
- Joined: Sun Dec 01, 2013 10:05 am
Re: newbe question about magazines
At this time, I'm only interested in shooting small-bore standard rifle. I might try high power rifle later. I haven't shot one competitive small bore match yet, so I think I'll hold off on the high powered matches until I get some experience with the small bore matches. Thanks for the web site for an extra magazine. Anybody know if a dry-fire firing pin exists for an Anschutz 1808 MSR. Does anyone know who I might call to find out if a dry-fire firing pin even exists for my rifle?
-
boats
- AAA Poster

- Posts: 626
- Joined: Sun Dec 02, 2007 6:59 am
- Location: Virginia
Re: newbe question about magazines
60 shot match 3 mags is a good idea. However if shooting standard rifle you can single load. Anschutz has a plastic single load adaptor that works well. Have 3 mags for my 1712 use the single loader most of the time entering as a SR.
Filling mags is a pain time spent to come out of the gun and load single helps my pace. Others see it different.
Boars
Filling mags is a pain time spent to come out of the gun and load single helps my pace. Others see it different.
Boars
- OldRanger
- AAA Poster

- Posts: 992
- Joined: Thu Jun 06, 2013 9:00 am
- Location: Missoula, MT
- Contact:
Re: newbe question about magazines
If you can't find a dry firing pin many people here just use empty brass, rotate it after a couple shots and throw it out after 15ish shots. There are 2 things about putting in brass. The first is it prevents the firing pin from dinging the edge of the chamber, but also it gives the same 'feel' as a real firing. Make sure to clean the brass inside and out before dry firing.jaja wrote:At this time, I'm only interested in shooting small-bore standard rifle. I might try high power rifle later. I haven't shot one competitive small bore match yet, so I think I'll hold off on the high powered matches until I get some experience with the small bore matches. Thanks for the web site for an extra magazine. Anybody know if a dry-fire firing pin exists for an Anschutz 1808 MSR. Does anyone know who I might call to find out if a dry-fire firing pin even exists for my rifle?
I buy all my guns from t-rex. He's a small arms dealer.
-
jaja
- B Poster

- Posts: 85
- Joined: Sun Dec 01, 2013 10:05 am
Re: newbe question about magazines
Thanks for the tip regarding dry firing on spent 22 shells. I still cannot find a manual for an Anschutz 1808 MSR. I looked on the Anschutz web site but still can't find a manual entitled Anschutz 1808 MSR. 1808 is not even listed in the 1800 series. Any help in pointing me in the right direction would be deeply appreciated. Those of you who own an Anschutz 1808 MSR, would you mind telling me the exact title of your manual. Perhaps I could find it on the internet if I had the exact title? Thanks in advance for your help.
- OldRanger
- AAA Poster

- Posts: 992
- Joined: Thu Jun 06, 2013 9:00 am
- Location: Missoula, MT
- Contact:
Re: newbe question about magazines
There is one on this page marked 1807 to 1813 smallbore target rifle. Just click the download link on the right side of it. Its in the 'Smallbore Rifle Previous Products' section.
http://jga.anschuetz-sport.com/index.ph ... &sprache=1
http://jga.anschuetz-sport.com/index.ph ... &sprache=1
I buy all my guns from t-rex. He's a small arms dealer.
-
boats
- AAA Poster

- Posts: 626
- Joined: Sun Dec 02, 2007 6:59 am
- Location: Virginia
Re: newbe question about magazines
You can buy a dry fire pin from Homer at Champions Choice.
Boats
Boats
-
Jerry G
- Uber Master Poster

- Posts: 2746
- Joined: Wed Apr 12, 2006 2:34 pm
- Location: Casa Grande, AZ
Re: newbe question about magazines
Or......... you can buy a package of the little yellow drywall inserts. They feed easy and eject when you open the bolt. They last forever.