rifle recommendation wanted
-
thskeer
- A Poster

- Posts: 180
- Joined: Thu Jun 25, 2009 4:58 am
rifle recommendation wanted
OK,
I have a marlin 39a already.
Is there a Marlin for Pistol caliber?
What is the best gun and sight combination for Pistol caliber?
Thanks
I have a marlin 39a already.
Is there a Marlin for Pistol caliber?
What is the best gun and sight combination for Pistol caliber?
Thanks
- Bob259
- Uber Master Poster

- Posts: 4337
- Joined: Sat Jul 15, 2006 7:16 pm
- Location: Phoenix, AZ
Re: rifle recommendation wanted
I use a Marlin .357 Model 1894CB with the 20" barrel. Easy to load for and does a nice job.
F Troop - Southwest Outpost
Proud Member of the Ram Slammers US Division (Two Bob)
Proud Member of the Ram Slammers US Division (Two Bob)
- ppkny
- Master Poster

- Posts: 1003
- Joined: Sat Aug 05, 2006 7:07 am
- Location: Endicott, NY
Re: rifle recommendation wanted
I started out with a Marlin 357 but with the shorter 18.5 barrel. I quickly found out that the short sighting radius is a big disadvantage. Tried mounting a tang sight out it to increase the distance and it helped but still not enough. Most everyone is shooting longer barreled guns. I since bought a Puma with 24 inch barrel and feel that this is a better choice.
ppkny
ppkny
-
Finprof
- A Poster

- Posts: 108
- Joined: Sat Oct 25, 2008 11:32 am
Re: rifle recommendation wanted
Marlin used to make an 1897 CB in 357 Magnum wiht a 24 inch barrell. If you look around gunbroker you can find one in like new condition. The longer barrell is definitely better. You can also get an 1894CL in 32-20 with a 22 inch barrell. . Some of the better shooters in my club use those and do well with them.
-
44 mag
- AAA Poster

- Posts: 536
- Joined: Mon Oct 13, 2008 6:28 am
- Location: Bradford, PA
- Contact:
Re: rifle recommendation wanted
My wife and i both shoot marlin 32-20 with 22 inch barrel.they work well and no recoil.williams or lyman on the rear and lyman on the front.they are hard to come by but there is one more left at grice gun shop in clearfield pa.
-
thskeer
- A Poster

- Posts: 180
- Joined: Thu Jun 25, 2009 4:58 am
Re: rifle recommendation wanted
How much were they asking?
-
44 mag
- AAA Poster

- Posts: 536
- Joined: Mon Oct 13, 2008 6:28 am
- Location: Bradford, PA
- Contact:
Re: rifle recommendation wanted
They are asking 600.00.it is over on the back wall to the right as you come in the door.kinda hidden.i had to serch for mine there because they didnt know they had 2.really nice shape
-
Steve Tapp
- B Poster

- Posts: 94
- Joined: Thu Jan 17, 2008 9:58 am
- Location: Alma, AR
Re: rifle recommendation wanted
Hey Tom, I started with a Rossi 92 puma in 357 mag 20" barrel with factory sights worked really well. Now I'm using a Marlin 1894 Cowboy in 32 mag 20" barrel williams/lyman getting some good scores in CA. Just got a Marlin 1894CL in 32-20. 22" barrel I'm just getting around to load testing and hopefully better scores than previous attempts. I'm using a Marlin 336a in 30-30 170 gr. Hornady interlocks. over 32gr of IMR 4064. I shot 2 master class scores in a row at Pala in sept. Get to shoot Pala again in Nov. I might even get to shoot at LASC also. Steve
-
glen ring
- Master Poster

- Posts: 1084
- Joined: Wed Oct 25, 2006 3:04 pm
Re: rifle recommendation wanted
Thskeer
I have a Marlin 1894M in .22 magnum that does a nice job in PC. The 22 magnum will leave an occasional ram standing, but is very accurate and has very little recoil. This gun was so nice my wife took it from me .
I have recently had my Marlin 1894c converted to a Cowboy Limited and Marlin did a great job. The .357 round is a great round to load and shoot in PC. I shot a couple of matches with the .357 in the CLA 200 yard match and the round will reliably put the Rams down at Raton, but the load is a maximum 180grain load. I purchased a Marlin Cowboy in 38-55 and with a very mild load and a 240 grain cast slug, all the targets fall easily.
I have a Marlin 1894M in .22 magnum that does a nice job in PC. The 22 magnum will leave an occasional ram standing, but is very accurate and has very little recoil. This gun was so nice my wife took it from me .
I have recently had my Marlin 1894c converted to a Cowboy Limited and Marlin did a great job. The .357 round is a great round to load and shoot in PC. I shot a couple of matches with the .357 in the CLA 200 yard match and the round will reliably put the Rams down at Raton, but the load is a maximum 180grain load. I purchased a Marlin Cowboy in 38-55 and with a very mild load and a 240 grain cast slug, all the targets fall easily.
Just Be Nice 
- timfinle
- A Poster

- Posts: 166
- Joined: Fri Dec 08, 2006 1:15 am
- Location: Arizona
Re: rifle recommendation wanted
Like many on this board, I have run a gamet of different cartridges for the PC game. My experience says to find a 32-20 or 25-20 Marlin and you will have a gun that is about as good as it can get for the PC game. I have tried, 357, 44 mag (still playing with this one, key word playing), 22 mag, 32-20 and 22lr. I am now playing around with the 44 mag (just for fun), and shooting in more serious competion the 32-20 with my 22lr as backup.
tim
-
krgriggs
- B Poster

- Posts: 81
- Joined: Sun Mar 15, 2009 2:02 pm
Re: rifle recommendation wanted
I would get a rifle with a 24" barrel in 32-20 or 25-20. A friend of mine is getting a 73 in 32-20 made by uberti, I think this would be an excellent choice. I shoot a 1892 winchester in 25-20, it has put 5 shots in one raged hole off a bench at 50 meters with the right load.
-
lone ringer
- Master Poster

- Posts: 1099
- Joined: Tue May 30, 2006 9:33 am
- Location: CA
Re: rifle recommendation wanted
What is the powder of your choice for the 25-20?krgriggs wrote:I shoot a 1892 winchester in 25-20, it has put 5 shots in one raged hole off a bench at 50 meters with the right load.
-
RBriscoe
- AA Poster

- Posts: 372
- Joined: Wed Jan 10, 2007 8:23 am
Re: rifle recommendation wanted
Yea, "inquiring minds want to know". ;)lone ringer wrote:What is the powder of your choice for the 25-20?krgriggs wrote:I shoot a 1892 winchester in 25-20, it has put 5 shots in one raged hole off a bench at 50 meters with the right load.
Tell us about the load.
-
krgriggs
- B Poster

- Posts: 81
- Joined: Sun Mar 15, 2009 2:02 pm
Re: rifle recommendation wanted
My particular 1892 likes the speer 75 grain bullets- all three powders work well with my 25-20 winchester and those are 4227 , h-110 and 322 powders. I would recommend only neck sizing, and wolf primers and checking case length after each firing. Good shooting
-
RBriscoe
- AA Poster

- Posts: 372
- Joined: Wed Jan 10, 2007 8:23 am
Re: rifle recommendation wanted
I have been doing some looking around for 25/20 rifles and, apparently, only the (22" round barrel) Marlin 1894 CL and the original Win 92s are available in the 25/20. The importer of the repro 92 says there is not sufficient interest to warrant.... The Uberti 1873 rifles (Cimarron and Taylor) offer the 32/20, but not the 25/20. Too bad.