4759 load suggestions wanted
-
redmist25
- B Poster

- Posts: 49
- Joined: Wed Sep 20, 2006 7:44 am
4759 load suggestions wanted
Could anyone share some load data for IMR 4759 for my .260 and 7/08. I have Sierra MK 107 for the .260 and Sierra 130 MK for the 7/08 to try out.
Thanks
Thanks
-
kevinbear
- AAA Poster

- Posts: 967
- Joined: Sat Mar 03, 2007 10:16 am
- Location: Parker Colorado
Re: 4759 load suggestions wanted
Not sure it's appropriate for a silhouette but I shoot lots of IMR 4759 through my 7-08's, 12 grains with a cast 140 will smooth out and break in a new barrel better than any other method I've tried. 18 grains with a 120 Nosler BT works quite nicely on fall turkeys where rifles are legal, that load is also a great load to introduce anyone to centerfire rifle shooting.
IMR 4759 was designed for reduced loads so you will be limiting your self on the performance of either cartridge by choosing it, however you could use it with lightweight hunting bullets for inexpensive practice.
IMR 4759 was designed for reduced loads so you will be limiting your self on the performance of either cartridge by choosing it, however you could use it with lightweight hunting bullets for inexpensive practice.
AAA Shooter politically incorrect and loving it
-
Bob Mc Alice
- Expert Master Poster

- Posts: 1772
- Joined: Mon Sep 11, 2006 6:54 am
- Location: Colorado
Re: 4759 load suggestions wanted
http://www.chuckhawks.com/reduced_recoil_reloads.htm
http://www.imrpowder.com/sr4759.html
The .260 and 7-08 are covered in this article using I 4759.
http://www.imrpowder.com/sr4759.html
The .260 and 7-08 are covered in this article using I 4759.