Pharr stock 1712 Krieger FS
-
coppertop
- A Poster

- Posts: 112
- Joined: Sun Mar 25, 2007 7:24 pm
- Location: prairie co arkansas
Pharr stock 1712 Krieger FS
Pharr RT/S stock. 13-7/8" LOP. 1712 Annie action. 2 lb 2 stage trigger. Pharr bottom metal. 23" Krieger barrel. Aproximately 500 rounds thru it. BKL rings with riser blocks. 7lbs- 6oz as it sits. Will probably need a couple of inches cut from the muzzle if you are using a heavy scope. I put this together for a friend 2 years ago, he is out of the silhouette business now. This is a top notch rifle, it shoots as good as it looks. Comes with two magazines. Has no issues, put a scope on it and compete. Fire sale at $1750. I would guess you would spend over $2000 to build the same rig now, and wait a year to get it. I gaurantee you will be pleased with it, or I will give a 100% refund.
I can't ever seem to be able to get pictures to load on this site, so If you would like pictures, email me.
I can't ever seem to be able to get pictures to load on this site, so If you would like pictures, email me.
Admit it, it's never the guns fault. M Sickel
-
diverdan
- B Poster

- Posts: 26
- Joined: Sun Jul 29, 2012 12:25 pm
Re: Pharr stock 1712 Krieger FS
can you send photos to [email protected]
-
coppertop
- A Poster

- Posts: 112
- Joined: Sun Mar 25, 2007 7:24 pm
- Location: prairie co arkansas
Re: Pharr stock 1712 Krieger FS
Did some figuring this morning.
Barreled action new @ champions choice $975
Pharr stock ( if you can still find them). $250
Krieger barrel. $330
Pharr bottom metal, trigger shoe. $100
Scope rings. $40
Total components $1720
The labor to inlet, fit barrel, chamber, and assemble is $200-$400 depending who you hire.
So you see you get the gun for the cost of the parts, my work is free, and you won't spend a
year tracking down components and waiting on a smith to get off his rear.
Barreled action new @ champions choice $975
Pharr stock ( if you can still find them). $250
Krieger barrel. $330
Pharr bottom metal, trigger shoe. $100
Scope rings. $40
Total components $1720
The labor to inlet, fit barrel, chamber, and assemble is $200-$400 depending who you hire.
So you see you get the gun for the cost of the parts, my work is free, and you won't spend a
year tracking down components and waiting on a smith to get off his rear.
Admit it, it's never the guns fault. M Sickel
- GeoNLR
- Sponsor

- Posts: 645
- Joined: Fri Nov 18, 2005 8:23 am
-
Hawk-1
- A Poster

- Posts: 207
- Joined: Mon Feb 01, 2010 6:49 pm
- Location: North Carolina
Re: Pharr stock 1712 Krieger FS
Pm sent
-
coppertop
- A Poster

- Posts: 112
- Joined: Sun Mar 25, 2007 7:24 pm
- Location: prairie co arkansas
-
coppertop
- A Poster

- Posts: 112
- Joined: Sun Mar 25, 2007 7:24 pm
- Location: prairie co arkansas
Re: Pharr stock 1712 Krieger FS
Back up for sale. It was too heavy to make weight with most popular sihouette scopes. I removed the barrel and contoured it. The barrel contour is very similar to a factory 1712 barrel. It is 12 ounces lighter now, weighing in just as it is in the pictures with the rings and one magazine at 6 pounds 10 ounces. That should leave room for even the heaviest scope. The price now is $1600 plus shipping. The price is non-negotiable. I am losing money at this price. I just put a scope on it today after the modifications, at 44 yards I shot three consecutive five shot groups with the cheap SK. The largest of the three groups measured .396. It is still a shooter, even with a lighter barrel.
Admit it, it's never the guns fault. M Sickel
-
red-top dakota
- B Poster

- Posts: 34
- Joined: Mon Nov 29, 2010 8:37 pm
Re: Pharr stock 1712 Krieger FS
I sent PM, don't know if I did it correctly. E-Mail me at [email protected] if you did not get e-mail. Thanks, Kelly
-
coppertop
- A Poster

- Posts: 112
- Joined: Sun Mar 25, 2007 7:24 pm
- Location: prairie co arkansas
-
coppertop
- A Poster

- Posts: 112
- Joined: Sun Mar 25, 2007 7:24 pm
- Location: prairie co arkansas
Re: Pharr stock 1712 Krieger FS
Third times a charm. I am going to part this gun out. Stock is a Pharr RT/S inlet and Devcon bedded for a 1712 action. Pharr bottom metal is included. $500 shipped or best offer. Action is a 1712 with two stage trigger and 2 magazines. It is threaded for a barrel instead of pinned. $850 shipped or best offer. The barrel is a Krieger 16 twist sporter contour. The finish on the outside from contouring is the reason the gun was returned. $200 shipped or best offer. If one would like the gun as it sits, the price is $1500 shipped, but I will not offer a refund policy.
Admit it, it's never the guns fault. M Sickel
-
shooterxtc
- B Poster

- Posts: 73
- Joined: Fri Jun 26, 2009 6:54 pm
Re: Pharr stock 1712 Krieger FS
sending a pm
-
val1
- B Poster

- Posts: 19
- Joined: Thu Sep 01, 2011 9:48 pm
Re: Pharr stock 1712 Krieger FS
I will Take the stock sending PM
-
coppertop
- A Poster

- Posts: 112
- Joined: Sun Mar 25, 2007 7:24 pm
- Location: prairie co arkansas
Re: Pharr stock 1712 Krieger FS
Entire rifle has been sold. Thanks.
Admit it, it's never the guns fault. M Sickel
-
cedestech
- Distinguished Master Poster w/Palms

- Posts: 2388
- Joined: Sun May 08, 2011 3:06 pm
Re: Pharr stock 1712 Krieger FS
coppertop wrote:Entire rifle has been sold. Thanks.
Emmett Dibble, Houston, Texas. Where's my buddy Jason? Keeper of electronic records and banisher of little pieces of paper?
-
red-top dakota
- B Poster

- Posts: 34
- Joined: Mon Nov 29, 2010 8:37 pm
Re: Pharr stock 1712 Krieger FS
Hay Coppertop, I received the rifle today, I LIKE it. I have bought two rifles off of the marketplace forum---both Anschutz. I think I have got to quit looking at this forum, I have contracted Annie-itis. Only cure is money and more Anschutz rifles. Thanks, Kelly.





