Timney for CZ452 worth it?
-
LH2
- B Poster

- Posts: 60
- Joined: Thu Jan 26, 2006 9:45 pm
- Location: AZ
Timney for CZ452 worth it?
I'm a lowly B-class shooter considering a Timney Trigger on my 452 Style. I think the current (stock but smoothed by a gunsmith) trigger is still hampering my scores, so I'm about to drop the money on a Timney install.
Have you guys got any better ideas?
Finally - I understand the Timney is adjustable from about 1.5# to 3.5#. Any reason not to just run it at the minimum pull setting?
Have you guys got any better ideas?
Finally - I understand the Timney is adjustable from about 1.5# to 3.5#. Any reason not to just run it at the minimum pull setting?
- BlauBear
- Uber Master Poster

- Posts: 2734
- Joined: Fri Jul 07, 2006 10:43 am
- Location: Fort Smith, AR
-
Pete A.
- A Poster

- Posts: 112
- Joined: Mon Jul 24, 2006 6:42 am
- Location: Houston
Have it in my youngest's CZ. I like it, as I have had Timney's on several centerfire rifles through the years. So was familar with what to expect. It ain't an Anschutz or a Jewel (it also ain't $300 either!) but better than most triggers. Our's is a consistent 2# trigger (minimum for "hunter" class).
One tip, be sure to remove enough wood behind the trigger. When you 'overpull' the trigger to remove the bolt the trigger travels more than the original and can bind on the wood. Thus needing sufficent wood removed.
I tried the "tricks" on 'rimfire central' but couldn't seem to get the more exact adjustments I could with the Timney. I use only very light oil on sear and get consistent results. I tried the different "moly's" but found the trigger would change it's pull weight after a while with these.
The advice about "get a case of ammo & practice" is golden.
Pete A.

One tip, be sure to remove enough wood behind the trigger. When you 'overpull' the trigger to remove the bolt the trigger travels more than the original and can bind on the wood. Thus needing sufficent wood removed.
I tried the "tricks" on 'rimfire central' but couldn't seem to get the more exact adjustments I could with the Timney. I use only very light oil on sear and get consistent results. I tried the different "moly's" but found the trigger would change it's pull weight after a while with these.
The advice about "get a case of ammo & practice" is golden.
Pete A.

- BlauBear
- Uber Master Poster

- Posts: 2734
- Joined: Fri Jul 07, 2006 10:43 am
- Location: Fort Smith, AR
-
blueline
- B Poster

- Posts: 55
- Joined: Sat Jan 17, 2009 9:11 pm
- Location: Ben Avery, AZ
LH2 BB has the goods, That link will get you every thing you could want... If your looking for something close Brunos on central up by Deer Valley Airport. I bought some RWS at randalls in Glendale. He also has some eley match. I have had good results with CCI SV, and automatch but would suggest getting wolf or sk by the case from the link above...
How does you cz group at 100m as is????
I like Timminy triggers it should wake up your CZ!!!!!
Are you comming out to BA this sunday??
Blueline
How does you cz group at 100m as is????
I like Timminy triggers it should wake up your CZ!!!!!
Are you comming out to BA this sunday??
Blueline
Though I have been through Fire & Water, He has lead me to a place of abundance.
- BlauBear
- Uber Master Poster

- Posts: 2734
- Joined: Fri Jul 07, 2006 10:43 am
- Location: Fort Smith, AR
Get the Timney, a case of Eley target Rifle from Cathy and don't look back.
"If the America people ever allow private banks to control the issuance of their currencies, first by inflation and then by deflation, the banks and corporations that will grow up around them will deprive the people of all their prosperity" - TJ
-
LH2
- B Poster

- Posts: 60
- Joined: Thu Jan 26, 2006 9:45 pm
- Location: AZ
When the rifle was new I shot the best groups at 100 with RWS Target Rifle, followed by SK Std Plus. 1" off a rest no problem.
Since Midway's RWS brick price was pretty good at $46 I ordered some of that to tide me over for a while. I'll drop the rifle with Timney in Phoenix this week for them to do the install.
If this lot of RWS is as good as the last one I tried I'll be pleased. If not then I'll try some more SK.
I have not shot at BA yet - it's a long haul from the east valley. Just Rio Salado so far.
Since Midway's RWS brick price was pretty good at $46 I ordered some of that to tide me over for a while. I'll drop the rifle with Timney in Phoenix this week for them to do the install.
If this lot of RWS is as good as the last one I tried I'll be pleased. If not then I'll try some more SK.
I have not shot at BA yet - it's a long haul from the east valley. Just Rio Salado so far.
-
blueline
- B Poster

- Posts: 55
- Joined: Sat Jan 17, 2009 9:11 pm
- Location: Ben Avery, AZ
They will do ya right!!!
We are playing at Avery on Sunday if You can make it.. I wanted to go to TRC saturday bit I did not make it down there I know I missed a great match. We will catch up one of these days...
Blueline
We are playing at Avery on Sunday if You can make it.. I wanted to go to TRC saturday bit I did not make it down there I know I missed a great match. We will catch up one of these days...
Blueline
Though I have been through Fire & Water, He has lead me to a place of abundance.
-
durant7
- A Poster

- Posts: 142
- Joined: Sun Oct 08, 2006 6:41 am
- Location: Concord, NH
- BlauBear
- Uber Master Poster

- Posts: 2734
- Joined: Fri Jul 07, 2006 10:43 am
- Location: Fort Smith, AR
You'll be thrilled! I'm one of the few heretics that prefers a single stage trigger, even when a really nice two stage is available (see marketplace if you'd like a two stage 1712 Anschutz). Let us know how you like it!LH2 wrote:Dropped the rifle off at Timney here in Phx for the 2# trigger install.
No more excuses now!
"If the America people ever allow private banks to control the issuance of their currencies, first by inflation and then by deflation, the banks and corporations that will grow up around them will deprive the people of all their prosperity" - TJ
-
Pete A.
- A Poster

- Posts: 112
- Joined: Mon Jul 24, 2006 6:42 am
- Location: Houston
Durant if you look closely at Samuel's gun we have the "youth/scout" on the full sized left hand CZ 452. He had shot the shorter Scout for a while.
As his dexterity and profecincey increased I got him the "lefty". I called CZ and they sent the the stock for free. It did take some fitting but no problem for a back yard shop. The check piece is a bit worn and taped on rubber check piece. My play is to splice in a higher comb.
Tough part is these buggers are constantly growing thus needing fitting/refitting contantly. So it seems I'm always a step behind.
I like the cool color combo on yours. Samuel loves lots of stickers.
Pete A.
As his dexterity and profecincey increased I got him the "lefty". I called CZ and they sent the the stock for free. It did take some fitting but no problem for a back yard shop. The check piece is a bit worn and taped on rubber check piece. My play is to splice in a higher comb.
Tough part is these buggers are constantly growing thus needing fitting/refitting contantly. So it seems I'm always a step behind.
I like the cool color combo on yours. Samuel loves lots of stickers.
Pete A.
-
Quonset Hut
- B Poster

- Posts: 82
- Joined: Sun Apr 09, 2006 7:58 pm
- Location: SE MI
As a B Shooter, time on trigger (practice) is more important than which trigger. A good part of this game is mental. If you thought your trigger was bad, it was, to you. A new trigger is cheaper than a step-up rifle. Shoot a case of ammo. Also, consider the NRA Light Rifle Standing Qualifiaction for a little change of pace and improvement. I started with a Marlin 25 with a (now, to me) horrible trigger. But a summer of shooting, a case of ammo, and the time spent on the silhouette field and Lt Rifle Qual made a big step up.
http://www.nrahq.org/education/training ... _rifle.asp
One reason I went for the 54-18 with a rail for position shooting is to eliminate the rifle as an excuse for my shooting...
http://www.nrahq.org/education/training ... _rifle.asp
One reason I went for the 54-18 with a rail for position shooting is to eliminate the rifle as an excuse for my shooting...
