Quick detach rings for Anshutz 1712?
-
sicigpat
- Unclassified Poster
- Posts: 4
- Joined: Tue Jul 15, 2014 8:48 pm
Quick detach rings for Anshutz 1712?
Hi all,
Does anyone use quick detach rings/mounts for their Anschutz 1712? If, so what brand/type?. I will be mounting a Leupold vx2 6-18 AO scope. Thanks.Patrick
Does anyone use quick detach rings/mounts for their Anschutz 1712? If, so what brand/type?. I will be mounting a Leupold vx2 6-18 AO scope. Thanks.Patrick
- Bob259
- Uber Master Poster

- Posts: 4337
- Joined: Sat Jul 15, 2006 7:16 pm
- Location: Phoenix, AZ
Re: Quick detach rings for Anshutz 1712?
I don't ave the on my Silhouette rifles, because of weight, but have them on some others and I like the Leupold's best.
F Troop - Southwest Outpost
Proud Member of the Ram Slammers US Division (Two Bob)
Proud Member of the Ram Slammers US Division (Two Bob)
-
boats
- AAA Poster

- Posts: 626
- Joined: Sun Dec 02, 2007 6:59 am
- Location: Virginia
Re: Quick detach rings for Anshutz 1712?
Long story but
When I used a Kimber 82 sporter set up under the old 7 1/2 lb rule used a Weaver KT 15 to make weight. Rule weight went up to 8 1/2 lbs moved the Weaver to my Air Rifle and I put a Leupold 6.5x20 on the Kimber with Leupold QD rings. 2nd Scope for the Kimber was a Leupold 2x7 compact used for hunting. At the time I shot a Standard Silhouette Rifle most. Hunter was not used a lot. Scopes switched perfectly back and forth with no change in zeros at all
Then sold the Kimber for a Anschutz 1712. 6.5x20 would not make weight on the Anschutz using the QD's. Rings, the lever lock models, work very well you just have to watch the weight.
Boats
When I used a Kimber 82 sporter set up under the old 7 1/2 lb rule used a Weaver KT 15 to make weight. Rule weight went up to 8 1/2 lbs moved the Weaver to my Air Rifle and I put a Leupold 6.5x20 on the Kimber with Leupold QD rings. 2nd Scope for the Kimber was a Leupold 2x7 compact used for hunting. At the time I shot a Standard Silhouette Rifle most. Hunter was not used a lot. Scopes switched perfectly back and forth with no change in zeros at all
Then sold the Kimber for a Anschutz 1712. 6.5x20 would not make weight on the Anschutz using the QD's. Rings, the lever lock models, work very well you just have to watch the weight.
Boats
-
kevinbear
- AAA Poster

- Posts: 967
- Joined: Sat Mar 03, 2007 10:16 am
- Location: Parker Colorado
Re: Quick detach rings for Anshutz 1712?
Once you get your zero's for the animals it's probably best to leave the scope on the gun for the duration, same thing with ammunition, buy it by the case, get zero's and shoot only that ammunition. There's to many things to think about in this game if your not 100% certain your gun is sighted in before arriving at the tournament.
AAA Shooter politically incorrect and loving it
-
sicigpat
- Unclassified Poster
- Posts: 4
- Joined: Tue Jul 15, 2014 8:48 pm
Re: Quick detach rings for Anshutz 1712?
Thanks for the advice gents.I'm a service rifle shooter and am new to this game. I've been reading prior post and didnt realize there were so many ring/mounting choices.Seems like the simplest way to go is with a burris signature or other 11mm fixed base /ring set up?
- DavidABQ
- Expert Master Poster

- Posts: 1825
- Joined: Mon Jul 27, 2009 9:33 pm
Re: Quick detach rings for Anshutz 1712?
kevinbear wrote:Once you get your zero's for the animals it's probably best to leave the scope on the gun for the duration, same thing with ammunition, buy it by the case, get zero's and shoot only that ammunition. There's to many things to think about in this game if your not 100% certain your gun is sighted in before arriving at the tournament.
Good advice but that fancy ammo is damn expensive.