Powder Question

Centerfires, rimfires, pistol cartridges and everything in between.
Post Reply
chuck d
A Poster
A Poster
Posts: 243
Joined: Sat Feb 24, 2007 2:48 pm

Powder Question

Post by chuck d »

I am looking at one powder that will work for 30-30 with all bullets, all yard lines the best. Like keeping loading simple.
Sems like H322 and Varget may be the favorites? bullets 125-170.

thanks
chuck
boats
AAA Poster
AAA Poster
Posts: 626
Joined: Sun Dec 02, 2007 6:59 am
Location: Virginia

Re: Powder Question

Post by boats »

I use Varget for 170's same powder as my 7mm08 4227 for the 125's same power for cast bullet loads in 32/40 & 38/55

Full power 170's and light 125's for CPT = very different job. May be all purpose powder out there but I don't know about it.

Boats
44 mag
AAA Poster
AAA Poster
Posts: 536
Joined: Mon Oct 13, 2008 6:28 am
Location: Bradford, PA
Contact:

Re: Powder Question

Post by 44 mag »

I know guys that use Varget with all those bullets and I know guys that use H-322 with all. But the best I have seen for bullets weighing 125-170 grain is Reloader-7. I was useing that until I was told about IMR-SR4759 and now use that for the first 3 animals. You can use it on Rams but you will have trouble at times with rams falling. Good Luck Mike
User avatar
cslcAl
Master Poster
Master Poster
Posts: 1047
Joined: Wed Dec 07, 2005 4:15 pm
Location: Montoursville, Pa.
Contact:

Re: Powder Question

Post by cslcAl »

Chuck, Varget would be an excellent choice for an all round 30-30 powder. Very accurate and will give you good velosity. Al Foust
Team Sierra Member
User avatar
ppkny
Master Poster
Master Poster
Posts: 1003
Joined: Sat Aug 05, 2006 7:07 am
Location: Endicott, NY

Re: Powder Question

Post by ppkny »

Chuck, Here's some loads I got for the guys at CSLC a few years ago. I've been using them and they are great. No need to move the sights between animals.
30-30 loads using Varget
C/P - 30gr Varget sierra 150gr
T - 33gr Varget sierra 150gr
R - 32 gr Varget sierra 170gr
ppkny
boats
AAA Poster
AAA Poster
Posts: 626
Joined: Sun Dec 02, 2007 6:59 am
Location: Virginia

Re: Powder Question

Post by boats »

4759 is a darn good powder, it's all I used for years in Single Shots and reduced loads with 30 caliber cast bullets. I load 38/55 cast 6 x 60 round MTM boxes in one run & noticed dropped shots low time to time in matches. Double checked my powder weights out of the measure and found light charges every so often. 4759 is not easy to measure with most modern measures. Only one I found to do it well is a Belding & Mull that I normaly only run with Black Powder.

Switched almost all cast and reduced loads to 4227 which flows and measures real nice. Most of the single shot shooters will say 4759 and 4227 are about the same burn rate. Look at the charts some will say one is faster other charts say the other. If you don't want fast and filling about half the case one or the other is the powder to use. Still use 4759 for the 45/70 & weigh every charge

Boats
Post Reply