CZ 452 Dry Firing

teetertotter · Post by **teetertotter** » Sun Apr 10, 2011 3:32 pm

Does anyone recommend loading the magazine with #4-6 plastic drywall anchors for dry firing?

Jerry G · Post by **Jerry G** » Sun Apr 10, 2011 4:11 pm

What is wrong with using empty brass? It's cheep enough.

teetertotter · Post by **teetertotter** » Sun Apr 10, 2011 4:58 pm

Nothing. If the plastic anchors work, will be less time consuming and easier to pick up..etc. Reinsert in magazine and start all over with five shot rather than jimmy in a shell casing after each shot.

daisy · Post by **daisy** » Sun Apr 10, 2011 5:05 pm

On RimfireCentral I have read that CZ say it's ok to dry fire a 452, as the fireing pin won't hit anything. Others say they won't dry fire any gun .

teetertotter · Post by **teetertotter** » Mon Apr 11, 2011 6:36 am

I wrote CZ this morning and waiting reply.

baldy223 · Post by **baldy223** » Mon Apr 11, 2011 8:30 pm

teetertotter wrote:Nothing. If the plastic anchors work, will be less time consuming and easier to pick up..etc. Reinsert in magazine and start all over with five shot rather than jimmy in a shell casing after each shot.

No need to eject shell after your shot. Bring the bolt up and down w/o ejecting and you are good to go for another "shot".

daisy · Post by **daisy** » Wed Apr 13, 2011 9:49 pm

It's on again at rimfirecentral
http://www.rimfirecentral.com/forums/sh ... p?t=384509

silhouette13 · Post by **silhouette13** » Thu Apr 14, 2011 5:56 am

Matt Hunter of CZ usa emailed me back and said, the 452 is completely safe to dry fire. he got back to me right away.

Dave

teetertotter · Post by **teetertotter** » Thu Apr 14, 2011 6:14 am

I will go ahead and dry fire since Matt at CZ replied and said it was okay per his reply yesterday. Sure less muss and fuss with my fumble fingers trying to push in an empty casing everytime. Perhaps with more patience/practice, inserting an empty casing becomes easier. I might try the 4-6 plastic drywall anchors too. I bought some the other day. I appreciate the comments! Daisy, The Rimfire Central forum was very helpful.

CZforlife · Post by **CZforlife** » Thu Apr 14, 2011 8:24 pm

If your trying to cock your bolt you just have to go up and down. You dont have to go back. By doing this the bullet doesnt come out too.

boats · Post by **boats** » Sat Apr 16, 2011 5:37 pm

You need to dry fire. If the pin has a shoulder that stops it before it slams the edge of the barrel it's not a problem. Dry firing reputation was mostly made with guns that had floating pins with no stop like a Marlin 39A

I keep a few spares for my competiton guns. If they break I can fix them. Firing parts pins springs etc are good spares to have.

Boats

CZ 452 Dry Firing

CZ 452 Dry Firing

Re: CZ 452 Dry Firing

Re: CZ 452 Dry Firing

Re: CZ 452 Dry Firing

Re: CZ 452 Dry Firing

Re: CZ 452 Dry Firing

Re: CZ 452 Dry Firing

Re: CZ 452 Dry Firing

Re: CZ 452 Dry Firing

Re: CZ 452 Dry Firing

Re: CZ 452 Dry Firing