Newbie Question?
-
alan
- B Poster

- Posts: 94
- Joined: Mon Jun 07, 2010 5:42 pm
Newbie Question?
Is it okay o shoot a 1827 fortner Anshutz Biathlon rifle for shilhoutte?
Wondering of it fits inside the rules or box as it sits?
Thanks and excuse my ignorance...
Alan
Wondering of it fits inside the rules or box as it sits?
Thanks and excuse my ignorance...
Alan
- Bob259
- Uber Master Poster

- Posts: 4337
- Joined: Sat Jul 15, 2006 7:16 pm
- Location: Phoenix, AZ
Re: Newbie Question?
Out of the box as Biathlon the stock will not make it... But you can have it inlet into the McMillan or Pharr stock and shoot Standard with it.alan wrote:Is it okay o shoot a 1827 fortner Anshutz Biathlon rifle for shilhoutte?
Wondering of it fits inside the rules or box as it sits?
Thanks and excuse my ignorance...
Alan
F Troop - Southwest Outpost
Proud Member of the Ram Slammers US Division (Two Bob)
Proud Member of the Ram Slammers US Division (Two Bob)
-
alan
- B Poster

- Posts: 94
- Joined: Mon Jun 07, 2010 5:42 pm
Re: Newbie Question?
Again excuse my lack of understanding. The gun as a whole will not work but the barrel and action can be fitted into another qualifying stock?Bob259 wrote:Out of the box as Biathlon the stock will not make it... But you can have it inlet into the McMillan or Pharr stock and shoot Standard with it.alan wrote:Is it okay o shoot a 1827 fortner Anshutz Biathlon rifle for shilhoutte?
Wondering of it fits inside the rules or box as it sits?
Thanks and excuse my ignorance...
Alan
A MCMillian and a Phar are aftermarket stocks? Not sure what Inlet means with regard to rifle stocks?
Thanks Alan
Thanks Alan
- ppkny
- Master Poster

- Posts: 1003
- Joined: Sat Aug 05, 2006 7:07 am
- Location: Endicott, NY
Re: Newbie Question?
Inlet simply means that the action will need to be 'Fit" into the stock by custom machining the stock inside where the action and barrel fit to insure that the bearing points are correct for a praticular action assembly.
ppkny
ppkny
- Bob259
- Uber Master Poster

- Posts: 4337
- Joined: Sat Jul 15, 2006 7:16 pm
- Location: Phoenix, AZ
Re: Newbie Question?
Alan,
Here is a picture of a 1827 Anschutz I had built and in a McMillan stock for Std Rifle. Loved that Fortner action......

I also used a short 54.18 magazine well and the standard 5 round magazines to have it flush with the bottom of the stock, as the standard 1827 magazine well is long, as you already know.
Here is a picture of a 1827 Anschutz I had built and in a McMillan stock for Std Rifle. Loved that Fortner action......

I also used a short 54.18 magazine well and the standard 5 round magazines to have it flush with the bottom of the stock, as the standard 1827 magazine well is long, as you already know.
F Troop - Southwest Outpost
Proud Member of the Ram Slammers US Division (Two Bob)
Proud Member of the Ram Slammers US Division (Two Bob)
-
alan
- B Poster

- Posts: 94
- Joined: Mon Jun 07, 2010 5:42 pm
Re: Newbie Question?
That looks like a great setup.Bob259 wrote:Alan,
Here is a picture of a 1827 Anschutz I had built and in a McMillan stock for Std Rifle. Loved that Fortner action......
I also used a short 54.18 magazine well and the standard 5 round magazines to have it flush with the bottom of the stock, as the standard 1827 magazine well is long, as you already know.
Thanks for the photo is this gun then legal for the standard class?
Would it matter if the stock was the Keyhole stock?
Thanks agaiin.
Alan
- Bob259
- Uber Master Poster

- Posts: 4337
- Joined: Sat Jul 15, 2006 7:16 pm
- Location: Phoenix, AZ
Re: Newbie Question?
Yes I shot it in the Nationals and a few local matches and my friend had a left handed one as well, both from Neal Johnson's when they were in business.alan wrote:That looks like a great setup.
Thanks for the photo is this gun then legal for the standard class?
Would it matter if the stock was the Keyhole stock?
Thanks agaiin.
Alan
Any stock that meets the dimensions and fits the jig would be legal.
F Troop - Southwest Outpost
Proud Member of the Ram Slammers US Division (Two Bob)
Proud Member of the Ram Slammers US Division (Two Bob)
-
alan
- B Poster

- Posts: 94
- Joined: Mon Jun 07, 2010 5:42 pm
Re: Newbie Question?
Good to know thanks.
I tried Neal just before he retired must have the wrong email address...
The research continues...
Thanks Alan
I tried Neal just before he retired must have the wrong email address...
The research continues...
Thanks Alan
- Bob259
- Uber Master Poster

- Posts: 4337
- Joined: Sat Jul 15, 2006 7:16 pm
- Location: Phoenix, AZ
Re: Newbie Question?
Evelio has done a few as well, contact him.
F Troop - Southwest Outpost
Proud Member of the Ram Slammers US Division (Two Bob)
Proud Member of the Ram Slammers US Division (Two Bob)
-
alan
- B Poster

- Posts: 94
- Joined: Mon Jun 07, 2010 5:42 pm
Re: Newbie Question?
Thanks for the suggestion.Bob259 wrote:Evelio has done a few as well, contact him.
I have sent Evelio a couple emails waiting for a response ;)
Regards Alan