Anyone done paper targets for 50 meters

This is what we do.
daisy
A Poster
A Poster
Posts: 238
Joined: Wed Feb 07, 2007 8:05 pm
Location: Pambula Australia

Anyone done paper targets for 50 meters

Post by daisy »

My local small bore club wants me to put on a paper silhouette match for our Christmas shoot in a couple of weeks. The butts are at 50 meters so I am looking for scaled targets.

TIA
daisy
User avatar
sobrbiker883
AA Poster
AA Poster
Posts: 432
Joined: Sat Sep 30, 2006 10:26 pm
Location: Gilbert AZ

Post by sobrbiker883 »

50yds is the closest I could find:

Rimfire Central's 50yd silhouettes in .pdf

Hope they work for ya.
Usually shooting scores right in class, too bad its the class below my classification!

Steve E
lone ringer
Master Poster
Master Poster
Posts: 1099
Joined: Tue May 30, 2006 9:33 am
Location: CA

Post by lone ringer »

I have targets for 25-50 and 100 meters. Send me a PM with your Email address if you would like to have them.
User avatar
Worker 11811
B Poster
B Poster
Posts: 51
Joined: Sat Feb 24, 2007 10:42 pm
Location: Pennsylvania
Contact:

Post by Worker 11811 »

I have chicken, pig, turkey and ram silhouettes in PDF format, sized for smallbore.

You can download them here:

>> Chicken <<
>> Pig <<
>> Turkey <<
>> Ram <<

The files will print out "Landscape" orientation on a standard US Letter (8.5 X 11 inch) paper using your laser printer or inkjet, etc. They print out one animal per page so there's lots of room to mark your shots or write information/notes in the margins.

I made these paper targets myself by scanning actual targets and processing the image on my computer so, unless the image of the chicken, pig, turkey and ram are somehow copyrighted or trademarked, these targets are totally free. I have electronically protected these files but you shouldn't need the password to print them out.

Any member or guest of SteelChickens.com has my permission to download these files and print them out and use them any way they wish with the provision that you can not charge money for them.
DO WHATEVER YOU WANT WITH THEM AS LONG AS THEY ARE TOTALLY FREE.

Now, with regard to sizing them for a particular distance:
If somebody would tell me the exact size they want them in decimal inches or millimeters I will resize the targets and repost them.

If you guys want, I'll make up a set with "SteelChickens.com" on them so that you can post them in your archives.
In girum imus nocte et consumimur igni.
User avatar
Jason
Uber Master Poster
Uber Master Poster
Posts: 3002
Joined: Tue Feb 28, 2006 7:36 pm
Location: Snohomish, WA

Post by Jason »

Nice targets. Might be nice to have them as outlines instead of solid black for those who normally shoot at white targets or can't see their scope dots or cowboy rifle sights against the black.
User avatar
Worker 11811
B Poster
B Poster
Posts: 51
Joined: Sat Feb 24, 2007 10:42 pm
Location: Pennsylvania
Contact:

Post by Worker 11811 »

Thanks! :)

I could make them outlines, 50% grey scale or even a crosshatch pattern.
If you don't mind wasting color ink/toner just to punch holes in paper, I can make them any color you want.

The originals are in Adobe Illustrator format so they are scalable and editable in virtually limitless ways. They can be sized, flipped, rotated, warped and even printed multiple times on one sheet.
(But I like them one per sheet because I can see where the shots went even from far away. Plus I can mark notes and things on them.)

Let me know how you want them. When I get time I'll redo them and label them with the website logo so they can be posted in the archives.
In girum imus nocte et consumimur igni.
tbone49
A Poster
A Poster
Posts: 170
Joined: Sun Oct 14, 2007 10:06 am
Location: hollywood, florida

Post by tbone49 »

a black outline would be great, thanks
lone ringer
Master Poster
Master Poster
Posts: 1099
Joined: Tue May 30, 2006 9:33 am
Location: CA

Post by lone ringer »

Hello Everyone, for those interested in having paper targets for 25-50 and 100 meters, a friend of mine designed some with heavy black outlines to save ink and also paper. The 100 are two of the same kind to a page, the 50 meter 5 of the same kind to a page and the 25 meter 20 (five of each kind to a page). If any body is interested in them please send me a PM
User avatar
Worker 11811
B Poster
B Poster
Posts: 51
Joined: Sat Feb 24, 2007 10:42 pm
Location: Pennsylvania
Contact:

Post by Worker 11811 »

Try these on for size:

>> Smallbore Silhouette Targets - Black <<

>> Smallbore Silhouette Targets - Grey <<

>> Smallbore Silhouette Targets - Outline <<

>> Smallbore Silhouette Targets - Outline - Scaled to 25 yds. <<

>> Smallbore Silhouette Targets - Outline - Scaled to 50 yds. <<

Each document is a 4 page Adobe Acrobat PDF file. All four animals come in one file. (e.g. All black, all outlined or all scaled, etc.)

Again, these targets are totally free. You may not charge for them.

Second, I have done my work as carefully as I can and I THINK the scaling is all correct. I simply scaled them according to percentage.

Code: Select all

Orig. Dist / New Dist * 100 = Scale Factor %
I simply told Adobe Illustrator to scale my original designs to the new percentage. If somebody would double check my work before releasing them into the wild, I would appreciate it. :)

Finally, I have made the outlines so that the outer edge of the black outline is the outer edge of the "hit zone". (i.e. If a bullet hole touches black it is a hit.)

Oh! I noticed that the original poster wanted targets scaled for meters not feet/yards. If these targets prove satisfactory I can produce another set to the correct scale. Just give me a couple-few day's notice. I have to do these in my off-hours at work.
In girum imus nocte et consumimur igni.
tbone49
A Poster
A Poster
Posts: 170
Joined: Sun Oct 14, 2007 10:06 am
Location: hollywood, florida

Post by tbone49 »

thanks! you are a genius , kevin
User avatar
Worker 11811
B Poster
B Poster
Posts: 51
Joined: Sat Feb 24, 2007 10:42 pm
Location: Pennsylvania
Contact:

Post by Worker 11811 »

Image

Aww... That was nothin'. The REAL b*tch was inventing the Candygram!
In girum imus nocte et consumimur igni.
daisy
A Poster
A Poster
Posts: 238
Joined: Wed Feb 07, 2007 8:05 pm
Location: Pambula Australia

Post by daisy »

G'day Worker 11811

I didn't think it was Pennsylvania Dutch

"IN GIRUM IMUS NOCTE ET CONSUMIMUR IGNI"
This famous maccaronic verse, called "the devil's verse", is a riddle in the form of a palindrome - literally a puzzle inside a puzzle... It means "we wander in the night, and are consumed by fire" or "we enter the circle after dark and are consumed by fire" and is said to describe the movement of months. Some others believe that it is about the 'mayfly', that insect that circles the fire only to be consumed by flame.

daisy
User avatar
Worker 11811
B Poster
B Poster
Posts: 51
Joined: Sat Feb 24, 2007 10:42 pm
Location: Pennsylvania
Contact:

Post by Worker 11811 »

You're only the third person to figure that out!

Yes, it is believed to be a puzzle about a moth or a mayfly that is drawn to the light of a burning fire but it can also describe an activity which a person feels impulsively drawn to. Such as... Oh... I don't know... Silhouette shooting? ;)

Give me a couple of days to get some free time and I'll scale those last two sets of targets to meters. (91.44% if I did my math right.)
In girum imus nocte et consumimur igni.
daisy
A Poster
A Poster
Posts: 238
Joined: Wed Feb 07, 2007 8:05 pm
Location: Pambula Australia

Post by daisy »

Worker 11811 wrote:You're only the third person to figure that out!

Yes, it is believed to be a puzzle about a moth or a mayfly that is drawn to the light of a burning fire but it can also describe an activity which a person feels impulsively drawn to. Such as... Oh... I don't know... Silhouette shooting? ;)

Give me a couple of days to get some free time and I'll scale those last two sets of targets to meters. (91.44% if I did my math right.)
Just to let you know I was born and raised in PA. In Highspire just between Harrisburg and Three Mile Island.

Daisy
User avatar
Worker 11811
B Poster
B Poster
Posts: 51
Joined: Sat Feb 24, 2007 10:42 pm
Location: Pennsylvania
Contact:

Post by Worker 11811 »

>> Smallbore Silhouette Targets - Outline - Scaled to 25 meters. <<

>> Smallbore Silhouette Targets - Outline - Scaled to 50 meters. <<

Again, if somebody would sanity check these before using, it would be apprecieated.

Daisy, I'm from the other end of the state. Erie, to be exact.
Just how, in tarnation, did you end up Down Under? ;)
In girum imus nocte et consumimur igni.
Post Reply