smallbore hunting rifle

This is what we do.
Post Reply
siloet56
B Poster
B Poster
Posts: 55
Joined: Fri Apr 22, 2011 6:10 am

smallbore hunting rifle

Post by siloet56 »

Hi all
Dumb question..I have a ruger 10/22 with a factory stock with the barrel channel enlarged. I have a kidd ultralight barrel .870. As long as I adjust the weight Will this gun qualify for Hunter rifle class with this barrel
Thx siloet56... also it has a new ruger trigger in it.. can this trigger be adjusted to at least 2 lbs
Thx guys
danthebulldog
B Poster
B Poster
Posts: 64
Joined: Mon Mar 05, 2012 10:30 pm
Location: el paso tx
Contact:

Re: smallbore hunting rifle

Post by danthebulldog »

As long as the barrel is tapered, the trigger breaks at 2 pounds and the rifle weights 8 1/2 pounds you are good
User avatar
acorneau
AAA Poster
AAA Poster
Posts: 980
Joined: Sun Feb 22, 2015 12:12 pm
Location: Houston

Re: smallbore hunting rifle

Post by acorneau »

danthebulldog wrote:As long as the barrel is tapered, the trigger breaks at 2 pounds and the rifle weights 8 1/2 pounds you are good
To clarify Dan's statement... "trigger breaks 2 pounds or more and the rifle weighs 8 1/2 pounds or less".

I don't know how much adjustment is available in the new Ruger trigger, but I thought they came factory set around 2.5 pounds.

Most likely your local club/match won't care too much about anything that is a little out of spec, but if you go to a state, regional, or national match you'll have to have your gear up to snuff.

I started with a mostly-stock 10/22 and used it for my first 5 months or so, but I recently upgraded to a CZ-452.

Good luck and welcome to the sport!
Allen Corneau
User avatar
snaketail2
AAA Poster
AAA Poster
Posts: 738
Joined: Wed May 29, 2013 8:55 am
Location: Rockport,Tx

Re: smallbore hunting rifle

Post by snaketail2 »

acorneau wrote:
danthebulldog wrote:
I don't know how much adjustment is available in the new Ruger trigger, but I thought they came factory set around 2.5 pounds.

You misplaced the decimal point - should read 25.0 pounds. Ruger factory triggers are seriously heavy.

M
Overheard at the Dairy Queen "I live in Port Aransas,but I'm not from here...you can tell because I have all my own teeth."
User avatar
Jason
Uber Master Poster
Uber Master Poster
Posts: 3002
Joined: Tue Feb 28, 2006 7:36 pm
Location: Snohomish, WA

Re: smallbore hunting rifle

Post by Jason »

I believe that the Kidd .870" ultralight barrel does not taper, so it would not qualify for hunter rifle even if all other requirements are met. See link below to confirm that this is the barrel you are referring to.

http://www.kiddinnovativedesign.com/KID ... p_128.html
User avatar
snaketail2
AAA Poster
AAA Poster
Posts: 738
Joined: Wed May 29, 2013 8:55 am
Location: Rockport,Tx

Re: smallbore hunting rifle

Post by snaketail2 »

Jason wrote:I believe that the Kidd .870" ultralight barrel does not taper, so it would not qualify for hunter rifle even if all other requirements are met. See link below to confirm that this is the barrel you are referring to.

http://www.kiddinnovativedesign.com/KID ... p_128.html

But Kidd does make a tapered barrel - just pick a different (stainless) one.
M
Overheard at the Dairy Queen "I live in Port Aransas,but I'm not from here...you can tell because I have all my own teeth."
User avatar
acorneau
AAA Poster
AAA Poster
Posts: 980
Joined: Sun Feb 22, 2015 12:12 pm
Location: Houston

Re: smallbore hunting rifle

Post by acorneau »

snaketail2 wrote:
acorneau wrote:
I don't know how much adjustment is available in the new Ruger trigger, but I thought they came factory set around 2.5 pounds.

You misplaced the decimal point - should read 25.0 pounds. Ruger factory triggers are seriously heavy.

M

No, the new Ruger trigger the OP is asking about is the BX-Trigger. The website states that it's factory set at approximately 2.75 pounds.

http://shopruger.com/Ruger-BX-Trigger/p ... nfo/90462/
Allen Corneau
thauglor
AAA Poster
AAA Poster
Posts: 663
Joined: Thu Aug 08, 2013 9:18 pm

Re: smallbore hunting rifle

Post by thauglor »

The taper barrel rule is preventing my model 64 anschutz from shooting in hunter class as well. Don't know why the rule is still in there.
User avatar
OldRanger
AAA Poster
AAA Poster
Posts: 992
Joined: Thu Jun 06, 2013 9:00 am
Location: Missoula, MT
Contact:

Re: smallbore hunting rifle

Post by OldRanger »

thauglor wrote:The taper barrel rule is preventing my model 64 anschutz from shooting in hunter class as well. Don't know why the rule is still in there.
Its there to prevent your 64 from being legal...
I buy all my guns from t-rex. He's a small arms dealer.
User avatar
DavidABQ
Expert Master Poster
Expert Master Poster
Posts: 1825
Joined: Mon Jul 27, 2009 9:33 pm

Re: smallbore hunting rifle

Post by DavidABQ »

OldRanger wrote:
thauglor wrote:The taper barrel rule is preventing my model 64 anschutz from shooting in hunter class as well. Don't know why the rule is still in there.
Its there to prevent your 64 from being legal...

Yep, my thoughts exactly. 8)
ywltzucanrknrl
A Poster
A Poster
Posts: 205
Joined: Thu Aug 06, 2009 3:41 pm

Re: smallbore hunting rifle

Post by ywltzucanrknrl »

siloet56, The July 2015 Rifle magazine had a decent article in it about Ruger triggers, some replacement parts/triggers and the new Ruger BX trigger. If you can find a copy, it's informational. Can't remember for sure, but I don't think the BX trigger in the article would go as low as 2 #'s.
rogersptl
AA Poster
AA Poster
Posts: 263
Joined: Wed May 16, 2007 8:12 pm
Location: Lander WY

Re: smallbore hunting rifle

Post by rogersptl »

Maybe and maybe not on the 'new' Ruger trigger; a factory 10/22 trigger can be honed to nearly 2# and all the grunch taken out. I worked mine over in my rabbit gun then got talked out of it and went to a bolt gun. The new owner had other issues not related to trigger and Ruger advised him to send it in. It came back w/o the reworked trigger and was back to heavy & gritty. No I didnt spent the time to modify it for him. I do have a new factory 10/22 trigger that got replaced with a KID unit--$35 and I'll send it to you. RJ
Close only counts with grenades and horseshoes.
thauglor
AAA Poster
AAA Poster
Posts: 663
Joined: Thu Aug 08, 2013 9:18 pm

Re: smallbore hunting rifle

Post by thauglor »

True, but the 1" barrel with a 0.99" crown is still legal cuz it has a taper.
DavidABQ wrote:
OldRanger wrote:
thauglor wrote:The taper barrel rule is preventing my model 64 anschutz from shooting in hunter class as well. Don't know why the rule is still in there.
Its there to prevent your 64 from being legal...

Yep, my thoughts exactly. 8)
Jerry G
Uber Master Poster
Uber Master Poster
Posts: 2746
Joined: Wed Apr 12, 2006 2:34 pm
Location: Casa Grande, AZ

Re: smallbore hunting rifle

Post by Jerry G »

If the new full bore Ruger has the BX-Trigger, it ain't bad. I shot one on the bolt gun that looks like an AR and I am thinking that is is in the range of 3 lbs. That little trip lever makes it feel almost like a 2 stage. I got a 1 inch 3 shot group at 200 meters with it.
User avatar
acorneau
AAA Poster
AAA Poster
Posts: 980
Joined: Sun Feb 22, 2015 12:12 pm
Location: Houston

Re: smallbore hunting rifle

Post by acorneau »

The "BX-Trigger" is only a replacement for the 10/22 (and Chargers) and not used in their other rifles.

http://shopruger.com/Ruger-BX-Trigger/p ... nfo/90462/
Allen Corneau
Post Reply