1712 sear adjustment?
-
Camster
- B Poster
- Posts: 46
- Joined: Thu Mar 27, 2008 4:20 pm
1712 sear adjustment?
What is the proper procedure for adjusting the sear on a two stage trigger? Thank you.
-
Evelio Mc Donald
- Sponsor
- Posts: 779
- Joined: Thu Feb 23, 2006 9:05 pm
- Location: Wimberley, Texas
Re: 1712 sear adjustment?
Back out the front screw until it is sticking out about 1/8" then play with the side screw, till you get it where you can fill a gentle stop of the first stage, before the second stage breaks.
Evelio.
Evelio.
Evelio
-
BCloninger
- Master Poster
- Posts: 1331
- Joined: Mon Feb 15, 2010 11:22 am
- Location: Fort Smith, Arkansas
Re: 1712 sear adjustment?
My procedure is to send it to Evelio...Camster wrote:What is the proper procedure for adjusting the sear on a two stage trigger? Thank you.
"You are never too old to set another goal or to dream a new dream."
- C.S. Lewis
- C.S. Lewis
-
Camster
- B Poster
- Posts: 46
- Joined: Thu Mar 27, 2008 4:20 pm
Re: 1712 sear adjustment?
I'd like to swap the trigger assembly into another gun.I just want it to be safe.
I'm accustomed to setting the single stage triggers-this one is a bit different.
I'm accustomed to setting the single stage triggers-this one is a bit different.