Leupold AO & EFR
-
- B Poster
- Posts: 56
- Joined: Mon May 21, 2007 5:58 am
- Location: OKC
Leupold AO & EFR
Leupold can build me a 6.5x20 scope with target turrets with EFR and AO. Does the AO really help that much if I'm shooting SB silhouettes?
Bob
Bob
- Innocent
- Uber Master Poster
- Posts: 5675
- Joined: Tue Jun 06, 2006 7:28 am
- Location: Merritt Island
Re: Leupold AO & EFR
Yes.
Mary
Mary
Proud member of SNOSS. I earned mine!
Proud member of IBDF Club...
Guilty until proven Innocent by the press.
Proud member of IBDF Club...
Guilty until proven Innocent by the press.
- BCloninger
- Master Poster
- Posts: 1331
- Joined: Mon Feb 15, 2010 11:22 am
- Location: Fort Smith, Arkansas
Re: Leupold AO & EFR
Mandatory.
With a regular, non-AO, rimfire scope pigs might look sharp, turkeys a little smudged, while rams and chickens would be blurry. ANd hey, those little buggers move around enough anyway.
With a regular, non-AO, rimfire scope pigs might look sharp, turkeys a little smudged, while rams and chickens would be blurry. ANd hey, those little buggers move around enough anyway.
"You are never too old to set another goal or to dream a new dream."
- C.S. Lewis
- C.S. Lewis
- Jason
- Uber Master Poster
- Posts: 3002
- Joined: Tue Feb 28, 2006 7:36 pm
- Location: Snohomish, WA
Re: Leupold AO & EFR
Yes, it's mandatory and it shouldn't be something you have to pay to have custom built for you. The VX3 6.5-20x40 EFR Target is a standard model. Make sure to get the one with the target dot reticle.
http://leupold.com/hunting-and-shooting ... fr-target/
http://leupold.com/hunting-and-shooting ... fr-target/
-
- B Poster
- Posts: 56
- Joined: Mon May 21, 2007 5:58 am
- Location: OKC
Re: Leupold AO & EFR
Boy, I have been confused! Sent my old Vari XIII to Leupold for a reticle change out (to a 1/2 min dot). They called and said my scope was broken, not repairable but replaceable under warranty. It was fine when I sent it. I asked for whatever new model that was exactly like my old one. Was told they don't make one but could custom build one. I asked for black gloss finish and the 1/2 min dot and was told it would take a month.
Three wks later, I called for status and was told the anodizing process is the main contributor for the 12 week delivery time! On top of that they don't do 1/2 min dots. They asked who I originally spoke to - I didn't remember (as if it mattered). They said a matte finish would drop the delivery time to a month and they could do a 3/8 min dot.
Got your responses about AO and that the VX-3 is what I want so I called 'em back. Sure, no problem. They still wouldn't do a bigger dot so I told 'em to ship it.
Great warranty but wish they had their stories straight!
Bob
Three wks later, I called for status and was told the anodizing process is the main contributor for the 12 week delivery time! On top of that they don't do 1/2 min dots. They asked who I originally spoke to - I didn't remember (as if it mattered). They said a matte finish would drop the delivery time to a month and they could do a 3/8 min dot.
Got your responses about AO and that the VX-3 is what I want so I called 'em back. Sure, no problem. They still wouldn't do a bigger dot so I told 'em to ship it.
Great warranty but wish they had their stories straight!
Bob
- BCloninger
- Master Poster
- Posts: 1331
- Joined: Mon Feb 15, 2010 11:22 am
- Location: Fort Smith, Arkansas
Re: Leupold AO & EFR
Leupold had similar problems getting everyone together on an FXIII I wanted modified to use in air rifle. One person said sure and another said "Who told you that? Oh, him - he's new." Okay. Eventually ended up with the VXIII EFR, where I should have been to begin with.
"You are never too old to set another goal or to dream a new dream."
- C.S. Lewis
- C.S. Lewis
- Bob259
- Uber Master Poster
- Posts: 4337
- Joined: Sat Jul 15, 2006 7:16 pm
- Location: Phoenix, AZ
Re: Leupold AO & EFR
I've had the same problems with them on my last scope through the custom shop.... and am still waiting for the anodozed front shade as they put the wrong one in the box. Their service has gotten terrible and I'm not sure why.bugabob wrote:..................Three wks later, I called for status and was told the anodizing process is the main contributor for the 12 week delivery time! On top of that they don't do 1/2 min dots. They asked who I originally spoke to - I didn't remember (as if it mattered). They said a matte finish would drop the delivery time to a month and they could do a 3/8 min dot..............Bob
F Troop - Southwest Outpost
Proud Member of the Ram Slammers US Division (Two Bob)
Proud Member of the Ram Slammers US Division (Two Bob)
-
- B Poster
- Posts: 46
- Joined: Thu Mar 27, 2008 4:20 pm
Re: Leupold AO & EFR
A gloss or custom finish really slows down the custom shop scope process.Frim what I've gleamed from having a few done,they are sent out,not done in house......Seems strange that a major scope producer wouldn't have this capability under their own roof.
- BCloninger
- Master Poster
- Posts: 1331
- Joined: Mon Feb 15, 2010 11:22 am
- Location: Fort Smith, Arkansas
Re: Leupold AO & EFR
Tasking an experienced assembler to use specific parts for a single scope is simpler than learning the subtleties of different paint methods and materials. Setting up a custom paint shop does seem like a risky departure from their real skills.
"You are never too old to set another goal or to dream a new dream."
- C.S. Lewis
- C.S. Lewis
- Jason
- Uber Master Poster
- Posts: 3002
- Joined: Tue Feb 28, 2006 7:36 pm
- Location: Snohomish, WA
Re: Leupold AO & EFR
Wouldn't they have to set up a custom anodizing shop? That's a lot more specialized than just painting.
- Bob259
- Uber Master Poster
- Posts: 4337
- Joined: Sat Jul 15, 2006 7:16 pm
- Location: Phoenix, AZ
Re: Leupold AO & EFR
Jason, They are not painting them, they are custom annodized colors.BCloninger wrote:Tasking an experienced assembler to use specific parts for a single scope is simpler than learning the subtleties of different paint methods and materials. Setting up a custom paint shop does seem like a risky departure from their real skills.
F Troop - Southwest Outpost
Proud Member of the Ram Slammers US Division (Two Bob)
Proud Member of the Ram Slammers US Division (Two Bob)
- BCloninger
- Master Poster
- Posts: 1331
- Joined: Mon Feb 15, 2010 11:22 am
- Location: Fort Smith, Arkansas
Re: Leupold AO & EFR
Okay - anodizing instead of painting. It's still a specialized skill that they probably didn't have in house, and it was more effective to contract for those skills than try to develop them in house.
Last edited by BCloninger on Sun Feb 21, 2010 6:06 am, edited 1 time in total.
"You are never too old to set another goal or to dream a new dream."
- C.S. Lewis
- C.S. Lewis
- Trent
- Expert Master Poster
- Posts: 1652
- Joined: Sun Nov 22, 2009 10:39 pm
- Location: Boise Idaho
Re: Leupold AO & EFR
I don't think the gloss scopes are anodized are they? Seems like those are painted. I could totally be wrong though.
-
- Expert Master Poster
- Posts: 1772
- Joined: Mon Sep 11, 2006 6:54 am
- Location: Colorado
Re: Leupold AO & EFR
Yes Trent, you are totally wrong on this one. Gloss Leupolds are anodized as are all the matte finished ones, too. They get a light bead blast or an acid etch bath prior to anodizing. Leupolds from the 60's and seventies that saw alot of sunlight tended to fade to a dark plum color over time. The dyes used in the process today are much more UV light resistant.
http://en.wikipedia.org/wiki/Anodizing
http://en.wikipedia.org/wiki/Anodizing
- Trent
- Expert Master Poster
- Posts: 1652
- Joined: Sun Nov 22, 2009 10:39 pm
- Location: Boise Idaho
Re: Leupold AO & EFR
Cool, thank you for straightening me out Bob.