Wolff spring
- timfinle
- A Poster
- Posts: 166
- Joined: Fri Dec 08, 2006 1:15 am
- Location: Arizona
Wolff spring
I had such high hopes for getting a nice trigger pull with the wolff spring kit. The wolff hammer spring will not move the hammer with enough force to detonate the primers. After cocking with the lever, pulling the trigger an getting nothing, if I manually cock the rifle then it will fire. Of course, this is the second strike on the primer so..... I am going to put the original spring back in the rifle.
By the way, I tried different rounds with different primers to eliminate that as a possiblity.
By the way, I tried different rounds with different primers to eliminate that as a possiblity.
tim
- Jason
- Uber Master Poster
- Posts: 3002
- Joined: Tue Feb 28, 2006 7:36 pm
- Location: Snohomish, WA
Had that same problem with a couple of my Marlins and had to put the factory springs back in, too. If you have a gunsmith that you trust, have him do a good trigger job on the Marlin with the original spring in it. The Marlin triggers are dead simple and fairly easy to do your own trigger job on if you have some time and the right stones, too.
-
- B Poster
- Posts: 91
- Joined: Thu Jan 17, 2008 9:58 am
- Location: Alma, AR