Anschutz 1712 Hunter (SOLD)
Posted: Tue Jul 30, 2013 3:54 pm
$1750 without scope and rings. The rifle is built by Evelio McDonald and Steve Wooster. Evelio installed the 4-groove RF53 contour Lilja tight-bore barrel and Steve did the work on the Robertson Composite Nieska Bay style lightweight stock. Steve used Marv Pearson's bottom metal. Includes two Brownells Wisner magazines (they fit and work better than OEM). Leupold 6.5-20EFR purple/pink custom 1/2MOA Leupold Dot, alumina caps and BKL rings $850 with rifle. $40 shipping if your FFL will accept from a non-FFL. No sales to California, Alaska or Hawaii.
There's a little wavyness where Steve had to build up the epoxy underneath the tang. It's not very noticeable and the color match to the RCI epoxy resin is right on.
Bedded. This is the new style safety on the 5109A trigger, not the old wing safety.
Makes weight at 8 pounds 7 ounces with a Leupold 6.5-20EFR, scope caps, BKL rings, and an empty magazine.
What you get for $1750 plus shipping.
Steve Grayner
[email protected]
There's a little wavyness where Steve had to build up the epoxy underneath the tang. It's not very noticeable and the color match to the RCI epoxy resin is right on.
Bedded. This is the new style safety on the 5109A trigger, not the old wing safety.
Makes weight at 8 pounds 7 ounces with a Leupold 6.5-20EFR, scope caps, BKL rings, and an empty magazine.
What you get for $1750 plus shipping.
Steve Grayner
[email protected]