Page 1 of 1
10X III Standard Rifle
Posted: Fri Nov 16, 2012 8:49 am
by stsbuyer
I am having a barrel threaded for a bloop tube like Briley used on the BMG silhouette standard rifle. The tube already has the threads (3/4"-16) in it. I would like to know how long the threaded portion of the barrel is if anyone has one they could messure for me.
Thanks,
Paul Freeman
Re: Briley BMG Info Needed
Posted: Sat Nov 17, 2012 8:50 am
by Evelio Mc Donald
Paul
It is already done, lenght of thread in tube is 2" lenght of thread in barrel is 1 1/2"
Re: Briley BMG Info Needed
Posted: Sat Nov 17, 2012 11:58 am
by Bob259
See Paul, done faster then you got a reply... Dr. Evelio one step ahead again ;)
Re: Briley BMG Info Needed
Posted: Mon Nov 19, 2012 5:48 am
by stsbuyer
Bob,
Yea Evelio is pretty quick. He showed me the barreled action Sunday. All he has to do now is put it in the stock. Will be able to start the new year out with my 10X III standard rifle.
Paul
Re: Briley BMG Info Needed
Posted: Mon Nov 19, 2012 7:06 am
by Bob259
stsbuyer wrote:Bob,
Yea Evelio is pretty quick. He showed me the barreled action Sunday. All he has to do now is put it in the stock. Will be able to start the new year out with my 10X III standard rifle.
Paul
Can't wait to see the pictures Paul, be sure to post.
Re: Briley BMG Info Needed
Posted: Mon Nov 19, 2012 11:46 am
by stsbuyer
Bob,
Will post some pictures of it once Evlio gets it back to me and I get the scope mounted. You know you could post a couple of your 10X sporter.
Re: Briley BMG Info Needed
Posted: Mon Nov 19, 2012 12:28 pm
by psteiger
Does that mean Nicholas gets to buy the Frankenhunter????
Re: Briley BMG Info Needed
Posted: Mon Nov 19, 2012 1:26 pm
by stsbuyer
Pat,
Bob has the 10X III Sporter not me. Frankenhunter will be the last to go after the 40x's.
Re: Briley BMG Info Needed
Posted: Tue Nov 27, 2012 10:00 am
by OLd_Sarge
when I first saw the title
I thought the rams where set hard in SD but a .50cal BMG that should do it
obviously I am way out of the loop on this, what is a bloop tube and what is it for? better groups?
Re: Briley BMG Info Needed
Posted: Tue Nov 27, 2012 2:24 pm
by stsbuyer
I am having a dedicated standard rifle built. The barrel will only be 18" long with a 10" hollow bloop tube added. This allows you to add weight to the tube and barrel at different spots to play with the balance of the rifle and still be under the weight limit. When the gun is done I will post pictures. As they say a picture will be worth a 1000 words.
10X III Standard Rifle
Posted: Mon Dec 03, 2012 7:08 am
by stsbuyer
Well here are picutes of my 10X III standard rifle. Have a couple of problems to work out but this is what it looks like.
10X III repeater action
Walther barrel 18" with bloop tube and weights
McMillan Master stock
Harrells rings
027.JPG
025.JPG
026.JPG
Re: 10X III Standard Rifle
Posted: Mon Dec 03, 2012 12:34 pm
by Bob259
Re: 10X III Standard Rifle
Posted: Wed Dec 05, 2012 2:13 pm
by chango2013
Mr. Paul
very nice rifle
