Page 1 of 1
Different loads for rams in pistol cartridge?
Posted: Tue Apr 24, 2012 8:04 am
by dustinflint
Do you guys shoot different loads for rams in pistol cartridge, specifically .357 mag, or do you shoot the same loads all the way through?
I'm planning on shooting a 125gr bullet and wondering whether I should order a box or 2 of heavier bullets (158gr?) for rams.
Dustin
Re: Different loads for rams in pistol cartridge?
Posted: Tue Apr 24, 2012 9:32 am
by cslcAl
Dustin,
125's will work fine for rams, as long as you are not shooting them real slow. When I shot a ,357 I shot my 125's around 1435fps. ans never lost a ram.
Al Foust
Re: Different loads for rams in pistol cartridge?
Posted: Tue Apr 24, 2012 9:34 am
by dustinflint
Great! Thanks.
Do you remember the powder charge you were using?
Dustin
Re: Different loads for rams in pistol cartridge?
Posted: Tue Apr 24, 2012 9:38 am
by Tlee
We shoot 125gr bullets at 1000 to 1100FPS and they've never failed to take down a Pistol Cartridge ram. If it's windy, we will occasionally switch to a 158gr bullet running the same velocity. Seems to be less affected by the wind than the 125s.
-Tim
PS - In 357 Mag cases we use 4.5gr of 700X with 125s, 5gr of 700X with 158s.
Re: Different loads for rams in pistol cartridge?
Posted: Tue Apr 24, 2012 9:45 am
by dustinflint
Thanks Tim, that's great info.
Dustin
Re: Different loads for rams in pistol cartridge?
Posted: Tue Apr 24, 2012 1:31 pm
by cslcAl
Dustin,
I used 6.5 grs. of Titegroup with 125 jacketed bullets of any flavor I could get cheap. 1438 vel.
Al