Page 1 of 1

Newbie Question?

Posted: Fri Jun 18, 2010 5:25 pm
by alan
Is it okay o shoot a 1827 fortner Anshutz Biathlon rifle for shilhoutte?
Wondering of it fits inside the rules or box as it sits?


Thanks and excuse my ignorance...:)

Alan

Re: Newbie Question?

Posted: Fri Jun 18, 2010 5:39 pm
by Bob259
alan wrote:Is it okay o shoot a 1827 fortner Anshutz Biathlon rifle for shilhoutte?
Wondering of it fits inside the rules or box as it sits?


Thanks and excuse my ignorance...:)

Alan
Out of the box as Biathlon the stock will not make it... But you can have it inlet into the McMillan or Pharr stock and shoot Standard with it.

Re: Newbie Question?

Posted: Fri Jun 18, 2010 9:04 pm
by alan
Bob259 wrote:
alan wrote:Is it okay o shoot a 1827 fortner Anshutz Biathlon rifle for shilhoutte?
Wondering of it fits inside the rules or box as it sits?


Thanks and excuse my ignorance...:)

Alan
Out of the box as Biathlon the stock will not make it... But you can have it inlet into the McMillan or Pharr stock and shoot Standard with it.
Again excuse my lack of understanding. The gun as a whole will not work but the barrel and action can be fitted into another qualifying stock?
A MCMillian and a Phar are aftermarket stocks? Not sure what Inlet means with regard to rifle stocks?


Thanks Alan



Thanks Alan

Re: Newbie Question?

Posted: Sat Jun 19, 2010 4:26 am
by ppkny
Inlet simply means that the action will need to be 'Fit" into the stock by custom machining the stock inside where the action and barrel fit to insure that the bearing points are correct for a praticular action assembly.
ppkny

Re: Newbie Question?

Posted: Sat Jun 19, 2010 7:00 am
by Bob259
Alan,
Here is a picture of a 1827 Anschutz I had built and in a McMillan stock for Std Rifle. Loved that Fortner action......
Image

I also used a short 54.18 magazine well and the standard 5 round magazines to have it flush with the bottom of the stock, as the standard 1827 magazine well is long, as you already know.

Re: Newbie Question?

Posted: Sun Jun 20, 2010 7:00 am
by alan
Bob259 wrote:Alan,
Here is a picture of a 1827 Anschutz I had built and in a McMillan stock for Std Rifle. Loved that Fortner action......
Image

I also used a short 54.18 magazine well and the standard 5 round magazines to have it flush with the bottom of the stock, as the standard 1827 magazine well is long, as you already know.
That looks like a great setup.
Thanks for the photo is this gun then legal for the standard class?
Would it matter if the stock was the Keyhole stock?

Thanks agaiin.

Alan

Re: Newbie Question?

Posted: Sun Jun 20, 2010 9:05 am
by Bob259
alan wrote:That looks like a great setup.
Thanks for the photo is this gun then legal for the standard class?
Would it matter if the stock was the Keyhole stock?

Thanks agaiin.

Alan
Yes I shot it in the Nationals and a few local matches and my friend had a left handed one as well, both from Neal Johnson's when they were in business.
Any stock that meets the dimensions and fits the jig would be legal.

Re: Newbie Question?

Posted: Sun Jun 20, 2010 10:00 am
by alan
Good to know thanks.
I tried Neal just before he retired must have the wrong email address...
The research continues...

Thanks Alan

Re: Newbie Question?

Posted: Sun Jun 20, 2010 11:33 am
by Bob259
Evelio has done a few as well, contact him.

Re: Newbie Question?

Posted: Mon Jul 05, 2010 9:36 am
by alan
Bob259 wrote:Evelio has done a few as well, contact him.
Thanks for the suggestion.
I have sent Evelio a couple emails waiting for a response ;)

Regards Alan