ANSCHUTZ BR50 $850 Clip feed fired 1 day AS NEW
Posted: Mon Oct 05, 2009 6:05 am
ON HOLD PF >>>>>>ANSCHUTZ 64 BR-50 2 STAGE TARGET TRIGGER.To increase accuracy the target crown was subjected to a special treatment to reach perfect target groups. The rifle is equipped with a heavy barrel ANSCHÜTZ target barrel and fulfil all accuracy requirements. The receiver is drilled and tapped to take scope mounts for a telescopic sight.
At this model of the series Match 64 modifications were carried out in the area of the receiver. The external diameter was enlarged from 25 mm to 26 mm. This modification entails some advantages. The weight of the receiver was increased by 12 % which makes the barreled action more rigid. In addition the locking surface is enlarged by 15 % which leads to even more safety for the shooter when firing the shot. The new shape of the receiver will be continued in the firing pin nut which makes the system more elegant. In addition the old engraving on the upper side of the prism has been replaced by the more attractive „WAVE.Total length
98.00 cm
38.58 inch
Weight appr.
3.50 kg
7.7 lbs this is a REPEATER
Width of benchrest surface: 64 mm / 2.52"
Length of benchrest surface: 275 mm / 10.8" This gun was fired 1 time 1 day ONLY and we no longer have a 22lr match shooting at my club,this BR 50 cost about $300 MORE than the Multi Purpose. In the box with all papers 1 mag.1 set of CUSTOM STEEL 25 MOA weaver type bases another $50 extra.in fact IF someone wants a factory ANSCHUTZ BR50 stock for the 64 action i would sell this 1 and keep the action the stocks alone cost $625 so if you want a FACTORY BR50 stock call me with a offer.gun has a longer Custom bolt handle another $30 spent.gun fired ONLY 100rds only. $850 plus $40 shipping FFL a MUST.the ONLY thing i need is a PISTOL scope.thanks john PH 419-485-0003.Ebay user name is 22eley over 225+ feedbacks OVER $1400 in my COST
At this model of the series Match 64 modifications were carried out in the area of the receiver. The external diameter was enlarged from 25 mm to 26 mm. This modification entails some advantages. The weight of the receiver was increased by 12 % which makes the barreled action more rigid. In addition the locking surface is enlarged by 15 % which leads to even more safety for the shooter when firing the shot. The new shape of the receiver will be continued in the firing pin nut which makes the system more elegant. In addition the old engraving on the upper side of the prism has been replaced by the more attractive „WAVE.Total length
98.00 cm
38.58 inch
Weight appr.
3.50 kg
7.7 lbs this is a REPEATER
Width of benchrest surface: 64 mm / 2.52"
Length of benchrest surface: 275 mm / 10.8" This gun was fired 1 time 1 day ONLY and we no longer have a 22lr match shooting at my club,this BR 50 cost about $300 MORE than the Multi Purpose. In the box with all papers 1 mag.1 set of CUSTOM STEEL 25 MOA weaver type bases another $50 extra.in fact IF someone wants a factory ANSCHUTZ BR50 stock for the 64 action i would sell this 1 and keep the action the stocks alone cost $625 so if you want a FACTORY BR50 stock call me with a offer.gun has a longer Custom bolt handle another $30 spent.gun fired ONLY 100rds only. $850 plus $40 shipping FFL a MUST.the ONLY thing i need is a PISTOL scope.thanks john PH 419-485-0003.Ebay user name is 22eley over 225+ feedbacks OVER $1400 in my COST