I am putting a new Leupold on my Weatherby XXII. Need ideas for a set of rings, I need tall ones. Suggestions?

thanks
chuck

Hi Chuckd

i strongly recomend buris signature rings w/ the offset insert kit.

they are nice and tall and the inserts will fix any ram elevation issues with out stressing your scope tube.

i know you want to use the dovetail so get sone dovetail to weaver adapters, i dont know if buris makes signature rings for the dovetail directly but they may .

dave

Hi Dave,
Where can I find dovetail to weaver base adaptors you mentioned?
TY
chuck
Bottom line is that i dont want to drill the receiver for bases.

the place i got mine is from eric brooks @ www.cz452.com a lot of people have order/delivery issues on blk bases but i got the adapters pretty fast with no issues

dave

I have a mark xxii and mounted a leupold on it. I am using Talley high rings. They are for an anschutz but it's the same action/dovetail and all that stuff. I think I bought mine from midway. They advertised the same rings for the mark xxii but they are medium and wouldn't be tall enough for the leupold. The high rings fit perfectly, have enough height to clear, and they just look good.

They do indeed, as I've got some 11 mm Burris rings on my 1712. I wanted to get some of the same for my CZ 453, but I first tried the ones from the Anschutz on there, and it bumped the CZ overweight. So, I've got to find some aluminum rings for that one. Perhaps some B-Square interlock fixed rings. I've got B-Square interlock adjustable rings for it, but they move from shot to shot sometimes. Not enough to worry about if it were for hunting, but for competition it's enough to matter. It just barely makes weight with the adjustable ones, so the fixed ones should give it a bit more wiggle room since it doesn't have the steel parts inside for adjustments.

silhouette13 wrote:i dont know if buris makes signature rings for the dovetail directly but they may.

Shorty-
After some research I found Burris RF rings, and they are made in aluminum in a medium height. Don't know if it helps, just passing it on.
chuck

Ah, cool, didn't know that. These ones I have here came with the second-hand 1712 that I bought off of one of our local regulars. I haven't actually looked at their product line, and just assumed they were all steel. Thanks!