Remington model 547 question

This is what we do.
User avatar
BCloninger
Master Poster
Master Poster
Posts: 1331
Joined: Mon Feb 15, 2010 11:22 am
Location: Fort Smith, Arkansas

Re: Remington model 547 question

Post by BCloninger »

Another Dang 9 wrote:
BCloninger wrote:There are several ways a 504 can go wrong, and most of those are fixed in the 547. My remaining complaint is that the 547 still clamps the barrel to the receiver instead of using a threaded or press fit, but the factory guarantees - and reputedly delivers - sub-moa accuracy using a Shilen barrel so there's no reason to mess with it. The only modification I'd make is to have it pillar bedded.

You would think they would have used a threaded reciever. Even ruger has swithed to a treaded reciever on the 77/22
Remington's clamped design is very twitchy about head space, at least in the 504, so I really wish they had gone to a threaded design, or at least pressed. They originally clamped the barrel so after-market barrels could be easily used, but I believe they really should have abandoned the design as a failed experiment.

504 bolt handles were glued on with an industrial adhesive that often broke down and left the bolt handle hanging by a set screw. The 547 bolt handle is integral to the locking ring so it can't come off. Remington also produced many 504's with bum barrels, so for the 547 they went to Shilen and eliminated that issue. Finally, to get around the finicky barrel clamp, they started assembling the 547 in their Custom Shop instead of trying to mass produce them in Tennessee.

It will never be a 1712, but it may be a viable alternative priced in between the CZ 452 and 1712; we won't know until someone tries a case or two of ammunition through one.
"You are never too old to set another goal or to dream a new dream."
- C.S. Lewis
User avatar
Another Dang 9
Master Poster
Master Poster
Posts: 1333
Joined: Thu Dec 10, 2009 7:24 pm
Location: The Peoples Republic of Massachusetts

Re: Remington model 547 question

Post by Another Dang 9 »

With as many good things I've heard about the CZ's I may roll the dice and try the 547. The price will be the deciding factor and if the local dealer can find one.
Its a dog eat dog world and I'm wearing milk bone underwear.
NRA Endowment Member
User avatar
Bob259
Uber Master Poster
Uber Master Poster
Posts: 4337
Joined: Sat Jul 15, 2006 7:16 pm
Location: Phoenix, AZ

Re: Remington model 547 question

Post by Bob259 »

BCloninger wrote:Remington's clamped design is very twitchy .......
Kind of like you =))

AD9 please do not encourage him any further, it took us years to break him.
F Troop - Southwest Outpost

Proud Member of the Ram Slammers US Division (Two Bob)
User avatar
BCloninger
Master Poster
Master Poster
Posts: 1331
Joined: Mon Feb 15, 2010 11:22 am
Location: Fort Smith, Arkansas

Re: Remington model 547 question

Post by BCloninger »

Bob259 wrote:
BCloninger wrote:Remington's clamped design is very twitchy .......
Kind of like you =))

AD9 please do not encourage him any further, it took us years to break him.
Hey, I'm just a little moody is all! Besides, Doc says the medication is helping...
"You are never too old to set another goal or to dream a new dream."
- C.S. Lewis
User avatar
Another Dang 9
Master Poster
Master Poster
Posts: 1333
Joined: Thu Dec 10, 2009 7:24 pm
Location: The Peoples Republic of Massachusetts

Re: Remington model 547 question

Post by Another Dang 9 »

Bob259 wrote:AD9 please do not encourage him any further, it took us years to break him.
Bob does that mean he's house broke enough to go on the papers! =))
Its a dog eat dog world and I'm wearing milk bone underwear.
NRA Endowment Member
User avatar
Innocent
Uber Master Poster
Uber Master Poster
Posts: 5676
Joined: Tue Jun 06, 2006 7:28 am
Location: Merritt Island

Re: Remington model 547 question

Post by Innocent »

AD9...naw papers are too poverty like for him, he would need the special pads they sell at the Chinese Distribution Center with special scent added to attract him and chemically activated to release fresh spring scents after use.

Innocent
Proud member of SNOSS. I earned mine!
Proud member of IBDF Club...

Guilty until proven Innocent by the press.
User avatar
Bob259
Uber Master Poster
Uber Master Poster
Posts: 4337
Joined: Sat Jul 15, 2006 7:16 pm
Location: Phoenix, AZ

Re: Remington model 547 question

Post by Bob259 »

Good one Mary... =))
F Troop - Southwest Outpost

Proud Member of the Ram Slammers US Division (Two Bob)
User avatar
BCloninger
Master Poster
Master Poster
Posts: 1331
Joined: Mon Feb 15, 2010 11:22 am
Location: Fort Smith, Arkansas

Re: Remington model 547 question

Post by BCloninger »

Student papers will do...
"You are never too old to set another goal or to dream a new dream."
- C.S. Lewis
User avatar
Innocent
Uber Master Poster
Uber Master Poster
Posts: 5676
Joined: Tue Jun 06, 2006 7:28 am
Location: Merritt Island

Re: Remington model 547 question

Post by Innocent »

BC, those aren't papers, those are electronically submitted, carefully scanned for viruses, grammatical, spelling and plagirism works of art.

Innocent
Proud member of SNOSS. I earned mine!
Proud member of IBDF Club...

Guilty until proven Innocent by the press.
User avatar
BCloninger
Master Poster
Master Poster
Posts: 1331
Joined: Mon Feb 15, 2010 11:22 am
Location: Fort Smith, Arkansas

Re: Remington model 547 question

Post by BCloninger »

Right as always, Mary, and I will see that they are treated appropriately...
"You are never too old to set another goal or to dream a new dream."
- C.S. Lewis
User avatar
Another Dang 9
Master Poster
Master Poster
Posts: 1333
Joined: Thu Dec 10, 2009 7:24 pm
Location: The Peoples Republic of Massachusetts

Re: Remington model 547 question

Post by Another Dang 9 »

I have got to have a beer with you guys...and gal some day. :ymparty: \:D/
Its a dog eat dog world and I'm wearing milk bone underwear.
NRA Endowment Member
User avatar
Bob259
Uber Master Poster
Uber Master Poster
Posts: 4337
Joined: Sat Jul 15, 2006 7:16 pm
Location: Phoenix, AZ

Re: Remington model 547 question

Post by Bob259 »

Another Dang 9 wrote:I have got to have a beer with you guys...and gal some day. :ymparty: \:D/
:shock: Again???? Here I thought we scared you off at the Nationals last year ;)
F Troop - Southwest Outpost

Proud Member of the Ram Slammers US Division (Two Bob)
User avatar
BCloninger
Master Poster
Master Poster
Posts: 1331
Joined: Mon Feb 15, 2010 11:22 am
Location: Fort Smith, Arkansas

Re: Remington model 547 question

Post by BCloninger »

Bob259 wrote:
Another Dang 9 wrote:I have got to have a beer with you guys...and gal some day. :ymparty: \:D/
:shock: Again???? Here I thought we scared you off at the Nationals last year ;)
If you ask nice you can try my custom 504 - although I've had to promise not to tell who built it...
"You are never too old to set another goal or to dream a new dream."
- C.S. Lewis
User avatar
Innocent
Uber Master Poster
Uber Master Poster
Posts: 5676
Joined: Tue Jun 06, 2006 7:28 am
Location: Merritt Island

Re: Remington model 547 question

Post by Innocent »

AD9, having a beer with us is fine, just don't ask us to come get you to go to the nearest gas station because you ran outta gas......the ride might get interesting, expecially when you leave the wife and 10 year old granddaugther in the 'empty' van.
Don't hold your breath on BC's 504, no telling what he has done or had done to it!

Innocent
Proud member of SNOSS. I earned mine!
Proud member of IBDF Club...

Guilty until proven Innocent by the press.
User avatar
Bob259
Uber Master Poster
Uber Master Poster
Posts: 4337
Joined: Sat Jul 15, 2006 7:16 pm
Location: Phoenix, AZ

Re: Remington model 547 question

Post by Bob259 »

BCloninger wrote:If you ask nice you can try my custom 504 - although I've had to promise not to tell who built it...
You forget.. I know who built it and they are still laughing ;) But I'd love to give her a test run.
F Troop - Southwest Outpost

Proud Member of the Ram Slammers US Division (Two Bob)
Post Reply