What Barrel?

This is what we do.
Post Reply
coppertop
A Poster
A Poster
Posts: 112
Joined: Sun Mar 25, 2007 7:24 pm
Location: prairie co arkansas

What Barrel?

Post by coppertop »

What is the brand and contour to use on a 1712 in a Pharr stock w/ leupold BR24 and make weight. I would like to finish out barrel around 21-22". I also would like a straight taper if possible. If anyone has something that will suit me, I'd rather buy a used one than wait 6 months on a manufacturer. Thanks, Mason.
Admit it, it's never the guns fault. M Sickel
User avatar
Evelio Mc Donald
Sponsor
Sponsor
Posts: 779
Joined: Thu Feb 23, 2006 9:05 pm
Location: Wimberley, Texas

Re: What Barrel?

Post by Evelio Mc Donald »

Mason
I normally use Lilja tight bore barrels in the 53 R contour, they will make weight for Hunter class on a Pharr stock.
Evelio.
Evelio
User avatar
BlauBear
Uber Master Poster
Uber Master Poster
Posts: 2734
Joined: Fri Jul 07, 2006 10:43 am
Location: Fort Smith, AR

Re: What Barrel?

Post by BlauBear »

There are many very good barrel makers, but if you stray from Evelio's advice (not that I would, of course... :roll: ), check the weight and actual contour measurements very carefully because different builders may list the same contours but they are not the same! A Krieger #3 is not necessarily the same as a Broughton #3 or a Lilja #3.
"If the America people ever allow private banks to control the issuance of their currencies, first by inflation and then by deflation, the banks and corporations that will grow up around them will deprive the people of all their prosperity" - TJ
Jerry G
Uber Master Poster
Uber Master Poster
Posts: 2746
Joined: Wed Apr 12, 2006 2:34 pm
Location: Casa Grande, AZ

Re: What Barrel?

Post by Jerry G »

I only had a 3 month wait on a Lilja bbl for my HP. If you order one he has in stock, there is no wait except the UPS shipping. His bbls are as good as any made, I think.
RBriscoe
AA Poster
AA Poster
Posts: 372
Joined: Wed Jan 10, 2007 8:23 am

Re: What Barrel?

Post by RBriscoe »

BlauBear wrote:There are many very good barrel makers, but if you stray from Evelio's advice (not that I would, of course... :roll: ), check the weight and actual contour measurements very carefully because different builders may list the same contours but they are not the same! A Krieger #3 is not necessarily the same as a Broughton #3 or a Lilja #3.
Tim North (Broughton) has a #5K contour (that's for Krieger) on file...not that his #5 contour isn't good, but I knew that the #5 Krieger made weight on my Hunter Rifle at 26 inches and with only ounces to spare did not want to experiment. He was very cooperative. It was a 5R 6.5mm barrel and shoots quite well.
User avatar
Evelio Mc Donald
Sponsor
Sponsor
Posts: 779
Joined: Thu Feb 23, 2006 9:05 pm
Location: Wimberley, Texas

Re: What Barrel?

Post by Evelio Mc Donald »

Carefull Rick, the weight limit on a High Power hunter is 9.0 lbs. the limit for a smallbore is 8 1/2 lbs. A 1/2 lb. can make a big difference in which contour to get. The no.5 will probably make weight if it is fluted, and you are using one on the 16 ounce scope.
Evelio.
Evelio
coppertop
A Poster
A Poster
Posts: 112
Joined: Sun Mar 25, 2007 7:24 pm
Location: prairie co arkansas

Re: What Barrel?

Post by coppertop »

The decision has been made and the gun is on it's way to Evelio. Thanks for the input.
Admit it, it's never the guns fault. M Sickel
User avatar
BlauBear
Uber Master Poster
Uber Master Poster
Posts: 2734
Joined: Fri Jul 07, 2006 10:43 am
Location: Fort Smith, AR

Re: What Barrel?

Post by BlauBear »

Yup, love Broughton barrels but a #5 Broughton is heavier than a #5 Lilja, so be careful with your basis for comparison. It was an "Oh... Well..." moment.
"If the America people ever allow private banks to control the issuance of their currencies, first by inflation and then by deflation, the banks and corporations that will grow up around them will deprive the people of all their prosperity" - TJ
Post Reply