Page 1 of 1

dot size

Posted: Tue Mar 23, 2010 6:51 am
by ldholton
first off i have shot for quite a while now and know i like using fine duplex much better than an little 1/8th min. dot but lattly been thinking about trying a 25 or 30 leuplod like to know from outhers which dot size you like ? is the 1/2min. too big ?

Re: dot size

Posted: Tue Mar 23, 2010 8:24 am
by BCloninger
I prefer the 3/8's.

Re: dot size

Posted: Tue Mar 23, 2010 9:10 am
by AZRifle
Personally I use the smaller 1/8 min on a 36X scope. That would be similar to view a 1/4 min in a 24x scope. I like it that way because it is a smaller yet easy to see spot and its actual location on the target. The bigger dot covers more target area. It goes back to the same principal on why I prefer the larger 36x magnification, it allows me better visibility on the actual location on the target.

Unfortunately all the advice in the world is only a bit of an aid regarding your personal preference. There are probalby as many people that have been shooting well for a long period of time with the 24x scope and the larger dot that feels it is better.

My 2-cents are in anyway haha!

Jerry

PS I think I had less spelling errors this time too...

Re: dot size

Posted: Wed Mar 24, 2010 12:19 pm
by shakes
go with the 3/8ths dot. perfect size for smallbore and highpower, if you are going with 25 to 30x. both my smallbores are 30x and my highpowers are 24x

Re: dot size

Posted: Sun Dec 19, 2010 11:44 am
by bwilliams
I also like the fine precision of a fine cross hair for bench shooting, but off hand is a little different. I have used a duoplex for silhouette shooting and switched it out for a 3/8 dot. i now shoot small bore 30x 3/8 dot and hp 24x 3/8. Have shoot with a borrowed 30x with a 1/2 dot and didn't like it. too big. The 1/8 moves jumps to much for me and i find it harder to pick up. 1/2 i find too big and distracting, however alot of excellent shooters use 1/2.
my 2 cents.
Brett

Re: dot size

Posted: Sun Dec 19, 2010 8:31 pm
by jjp
I'm on the other side. I like 1/2 minute. I like the bigger dots that I've tried even better. Here is what is in all my Leupolds.

Image

Re: dot size

Posted: Mon Dec 27, 2010 3:08 pm
by Jerry G
I shot a 3 min dot up in Canada one year and it was too big. Either the 3/8 or 1/2 are great.

Re: dot size

Posted: Mon Dec 27, 2010 6:09 pm
by Innocent
I like my one minute dot.
Mary

Re: dot size

Posted: Mon Dec 27, 2010 7:59 pm
by lone ringer
Jerry G wrote: Either the 3/8 or 1/2 are great.
I agree with Jerry.

Re: dot size

Posted: Mon Dec 27, 2010 8:02 pm
by lone ringer
jjp wrote:I'm on the other side. I like 1/2 minute. I like the bigger dots that I've tried even better. Here is what is in all my Leupolds.

Image
Don't know what size they are but I love the large Leupold dots on my scopes. Had recently two installed in two 6.5X20 EFR and previously two in two 24X BR

Re: dot size

Posted: Sun Jan 02, 2011 5:00 pm
by edgehit
Ringer -
Who installed the dots in your EFR?

Re: dot size

Posted: Sun Jan 02, 2011 5:41 pm
by lone ringer
Leupold dots I believe are a trade mark of Leupold and as far as I know they are the only ones that have them. Specify for the larger of the two other wise you are going to end up with a 1/8 minute dot. The larger is about 3/8 minute dot depending on the power of the scope but seems to be just the right size for shooting silhouettes offhand.

Re: dot size

Posted: Fri Mar 11, 2011 7:10 pm
by CZforlife
I use a 5/8 dot. Custom dot though

Re: dot size

Posted: Sat Mar 12, 2011 5:29 pm
by Innocent
CZFL...i'll let you try a 1 minute when you get to Jax.
Innocent

Re: dot size

Posted: Mon Mar 21, 2011 6:50 pm
by CZforlife
That dot was scary big lol