WANTED: Anschutz heavy barrels (read for details)

solid7 · Post by **solid7** » Fri Oct 09, 2009 6:09 pm

I am looking for heavy barrels for a match 54 action. (no taper, no contour, apprx .940" diameter with a fat bulge on the end) I am not so concerned how the barrel mates to the receiver, so long as it is at least 21" in length. I need barrels with good bore, and will be shortening the barrels to 17" length. (from the chamber end, of course) Factory Anschutz barrels only, please.

Please email send me private messages, email, or both.

Thank you.

a8461a · Post by **a8461a** » Sat Oct 10, 2009 7:48 pm

I HAVE A 54 MATCH BARREL WITH LESS THAN 1000 RDS FOT $100. THAHKS

solid7 · Post by **solid7** » Sat Oct 10, 2009 8:12 pm

email sent....

solid7 · Post by **solid7** » Wed Oct 14, 2009 5:02 pm

I am still looking for one more barrel - it MUST be the .940" diameter barrel. (this is the target, not silhouette barrel - from the older Match 54 rifles) The exact length of the barrel is not critical, so long as I have at least 21" of length to work with. (so from 21"-26" barrel lengths are good)

The barrel that I currently have is proof stamped 1966, and has only "Match 54" as identification, but I thought that I bought it as an 18XX or 19XX model.

WANTED: Anschutz heavy barrels (read for details)

WANTED: Anschutz heavy barrels (read for details)

Re: WANTED: Anschutz heavy barrels (read for details)

Re: WANTED: Anschutz heavy barrels (read for details)

Re: WANTED: Anschutz heavy barrels (read for details)