forming brass for your silhouette rifle
forming brass for your silhouette rifle
fellow silhouette shooters I would like to know how you form 260rem brass from 243 lapua brass. I just got a bad batch of rem brand brass.The lapua brass should be more uniform I need to know the correct way of forming the brass to 260 THANK YOU
Anthony G
Anthony G
- genphideaux
- AAA Poster
- Posts: 781
- Joined: Fri Nov 18, 2005 5:31 am
- Location: Woolmarket, Mississippi
forming brass
genphideaux that was a great answer to my question.
You could of just answered however you chose to be sarcastic.What a way to start a new forum.
I hope someone can explain the correct procedure on forming 260 brass from 243 brass.
Hope you have a merry Christmas
Anthony G
You could of just answered however you chose to be sarcastic.What a way to start a new forum.
I hope someone can explain the correct procedure on forming 260 brass from 243 brass.
Hope you have a merry Christmas
Anthony G
- genphideaux
- AAA Poster
- Posts: 781
- Joined: Fri Nov 18, 2005 5:31 am
- Location: Woolmarket, Mississippi
- duckgumbo
- Master Poster
- Posts: 1118
- Joined: Sun Nov 27, 2005 6:00 pm
- Location: Winnsboro, Louisiana - Home of the Southern Nationals, the Greatest Show on Dirt!
- Contact:
- genphideaux
- AAA Poster
- Posts: 781
- Joined: Fri Nov 18, 2005 5:31 am
- Location: Woolmarket, Mississippi
I would expect no less from inbreeds, guess you'all got a better way to show someone the light
Guest,
At least I post where I'm from
Rambuster40,
Lighten up, was just pointing you to the right forum. Guess I should have had the Moderator delete it since you have no PM capibilites and it was in the wrong forum. And yes this is a good way to start a new forum
Guest,
At least I post where I'm from
Rambuster40,
Lighten up, was just pointing you to the right forum. Guess I should have had the Moderator delete it since you have no PM capibilites and it was in the wrong forum. And yes this is a good way to start a new forum
We have but one life to live, live it like you stole it, live it right up to the hilt.
God Bless the USA
Dawg
God Bless the USA
Dawg
FORMING BRASS
IF YOU WOULD CHECK THE HP FORUM YOU WOULD SEE THAT I ALSO POSTED THE QUESTION THERE
ANTHONY G
ANTHONY G
- genphideaux
- AAA Poster
- Posts: 781
- Joined: Fri Nov 18, 2005 5:31 am
- Location: Woolmarket, Mississippi
Well excuse me I was not aware Brass forming was a Bi-forum topic, guess I need to realign my firing pin, or just let an off topic sit and not try and clue someone in . We used to have only one forum on the gray site, I believe that is why it is split on this site to better suite the application and intention of the question. But then again some people need max exposure.
We have but one life to live, live it like you stole it, live it right up to the hilt.
God Bless the USA
Dawg
God Bless the USA
Dawg
- stsbuyer
- AAA Poster
- Posts: 514
- Joined: Fri Nov 18, 2005 6:53 am
- Location: Alvin, TX
Dawg,
Why don't you just tell the truth, you don't shoot high power! Is there such a thing as a silhouette shooter that does not have a High Power silhouette rifle. Dawg tell me it's not true, come out and play with the BIG DAWG'S,
Rambuster, you are going to need a tapered expander. You should be able to find them available form most of the major reloading die manufacturers. It will replace the one in your 260 die and will make it were you can neck up the 243 brass.
Good Luck, Paul in beautiful downtown Alvin Texas
Why don't you just tell the truth, you don't shoot high power! Is there such a thing as a silhouette shooter that does not have a High Power silhouette rifle. Dawg tell me it's not true, come out and play with the BIG DAWG'S,
Rambuster, you are going to need a tapered expander. You should be able to find them available form most of the major reloading die manufacturers. It will replace the one in your 260 die and will make it were you can neck up the 243 brass.
Good Luck, Paul in beautiful downtown Alvin Texas
- genphideaux
- AAA Poster
- Posts: 781
- Joined: Fri Nov 18, 2005 5:31 am
- Location: Woolmarket, Mississippi
- genphideaux
- AAA Poster
- Posts: 781
- Joined: Fri Nov 18, 2005 5:31 am
- Location: Woolmarket, Mississippi
Stsbuyer,
Between you and my wife I can not figure out who spends my money faster, but I will admitte, your choices seem to be more in my favor.
great gun, greater cal.
Gonna have to get my .22 from him first, then me and you need to talk.
Between you and my wife I can not figure out who spends my money faster, but I will admitte, your choices seem to be more in my favor.
great gun, greater cal.
Gonna have to get my .22 from him first, then me and you need to talk.
We have but one life to live, live it like you stole it, live it right up to the hilt.
God Bless the USA
Dawg
God Bless the USA
Dawg
- genphideaux
- AAA Poster
- Posts: 781
- Joined: Fri Nov 18, 2005 5:31 am
- Location: Woolmarket, Mississippi