Page 1 of 1
Anschutz trigger parts...
Posted: Tue Nov 02, 2021 9:33 am
by cedestech
Does anyone have the part numbers for the pieces to turn a single stage into a dual stage trigger on the 1710/12 rifles?
Re: Anschutz trigger parts...
Posted: Wed Nov 03, 2021 5:30 am
by thauglor
I would call Neal at
http://www.iss-internationalshootersservice.com/
He helped me with my 64 action trigger with the correct part when I used to have that long ago.
Re: Anschutz trigger parts...
Posted: Wed Nov 03, 2021 6:11 am
by cedestech
Re: Anschutz trigger parts...
Posted: Wed Nov 03, 2021 6:37 pm
by thauglor
Damn, if he doesn't know I don't know anyone else, I am guessing you tried anshcutz north america?
Re: Anschutz trigger parts...
Posted: Wed Nov 03, 2021 7:11 pm
by cedestech
I have a message in to ANA. The last time I needed parts I had to call... I'll give them a day or three.
Re: Anschutz trigger parts...
Posted: Sat Nov 20, 2021 6:00 pm
by GSL
Neal Steppe only works on match rifles …
He will work on an Anschutz 54 match trigger
He will also work on Hunter class smallbore if :
It is a 5018 or 5071 variant
Re: Anschutz trigger parts...
Posted: Sun Nov 21, 2021 6:49 am
by cedestech
These 2 parts are the difference between single and 2 stage.
The 2 parts on the left he used to supply to change a single to a 2 stage.
Different springs for different weight ranges.
He doesn’t any more….
ANA doesn’t supply trigger parts either.
If you want to change now you have to buy a complete trigger….
It is what it is….
Re: Anschutz trigger parts...
Posted: Sun Nov 21, 2021 7:31 am
by atomicbrh
If Anschutz would make the parts, Stepp and ANA could stock and sell them.
Anschutz only promises parts supply for two years after the production of a rifle.
I saw it in the fine print somewhere.
That is not much support for such a expensive product.
Re: Anschutz trigger parts...
Posted: Mon Nov 22, 2021 3:49 pm
by acorneau
When I contacted Neil for two-stage trigger conversion parts for my 1710 this is all he sent...
IMG_0538.jpeg
Perhaps it was specific to my 1710 (wing safety) but Pat Steiger confirmed that this was the part I needed. Never got a parts list or anything so I can't say what the official part number would be.
Re: Anschutz trigger parts...
Posted: Mon Nov 22, 2021 8:06 pm
by cedestech
(That ship has sailed… )