Thank you for the info from Quickload. I appreciate your time.

Varn, what charge are you shooting with the CFE and the 143 grain bullet?

Way above the 25 grains that quickload suggested. I have no sticky bolt lift or case head expansion or blanked primers. But my gun is throated for them so that changes the situation. The base of the bullet is just below shoulder neck junction on my loaded rounds.

I run a 6.5tcu and load 27.6gns ADI BM2powder behind 123gn Amax
In 24 inch barrel velocity average is 2600Fps.
It is a hot load so approach with caution,
Shoots .25-.5MOA in my rifle