bolt failure
- psteiger
- AAA Poster
- Posts: 773
- Joined: Fri Jun 09, 2006 10:45 am
- Location: Friendswood, Texas
bolt failure
Sorry to change the subject, but a friend of mine recently had an uncontained failure of his rifle. He did everything right. He was shooting a factory, unmodified Anschutz 1907, using Eley Edge ammo. The bolt was fully closed and locked. It was an aimed shot. He was shooting 3p. He was wearing glasses. The back of the bolt was blown off. The innards were distributed in his face and across the range. He seems to be fine. ANA got the pieces, repaired the rifle and sent the pieces off for analysis. I saw the pictures. It was spectacular. Had he not been wearing glasses he would be blind in both eyes. Do you wear glasses? I am not a safety Nazi. I only ever once asked a member here why he let his son shoot without glasses. He replied it was just an air rifle, and he looked at me like I was the dummy. Last time I ever said anything to anyone.
I had white corn chips tonite with really hot red salsa. It was good. Would it have been less spicy with blue chips?
now back to our regularly scheduled whining![Rolling on the floor =))](./images/smilies/24.gif)
I had white corn chips tonite with really hot red salsa. It was good. Would it have been less spicy with blue chips?
now back to our regularly scheduled whining
![Rolling on the floor =))](./images/smilies/24.gif)
- Sporty
- AA Poster
- Posts: 329
- Joined: Sun Oct 12, 2014 4:05 pm
- Location: NC
Re: bolt failure
I'm glad he's okay. It wouldn't surprise me if they later found a squib.
-Charlie Meli
Match director @ Piedmont Gun Club, Rutherdfordton, NC
Match director @ Piedmont Gun Club, Rutherdfordton, NC
- psteiger
- AAA Poster
- Posts: 773
- Joined: Fri Jun 09, 2006 10:45 am
- Location: Friendswood, Texas
Re: bolt failure
case head blew off. Barrel clean. He was shooting aimed shots. the previous shot was scored.
- DAVIDMAGNUM
- A Poster
- Posts: 141
- Joined: Sat Oct 17, 2015 7:06 am
- Location: Middle of the Delmarva Penninsula
Re: bolt failure
No matter how long it takes please let us know what is found.
In the days of old when men were bold, and a quarter was still worth a dime.
Maryland's Eastern Shore
Maryland's Eastern Shore
- acorneau
- AAA Poster
- Posts: 889
- Joined: Sun Feb 22, 2015 12:12 pm
- Location: Houston
Re: bolt failure
He said that he has/had his cheek rest well above the bore line and that most likely kept him from having parts imbedded in his face. Had that been his silhouette rifle with the cheek piece no higher than the bore line (per the rules) it would have been a much different result.
... Last time I ever said anything to anyone.
![Rolling on the floor =))](./images/smilies/24.gif)
![Ha ha :))](./images/smilies/21.gif)
![Rolling on the floor =))](./images/smilies/24.gif)
![Ha ha :))](./images/smilies/21.gif)
Allen Corneau
-
- Master Poster
- Posts: 1293
- Joined: Sat Apr 15, 2006 7:24 pm
- Location: Rural Mississippi
Re: bolt failure
Eley will say it was the rifle. Anschutz will say it was the cartridge.
If you work with Anschutz rifles very much at all you will see bolt housings with casting flaws and cracks, broken ejection stops, parts that are not heat treated properly or not heat treated at all and other manufacturing flaws right out of the box. For the high prices that Anschutz charges for its rifles, the bolt housings and trigger housings should be cnc machined out of billet not cast. The relief hole not being able to vent off the explosion tells us that the bolt housing probably had a serious casting flaw. Before we leave home for every match, we inspect our bolt housings for cracks and flaws. Pat and Allen, thanks for posting this. It is a good safety reminder.
If you work with Anschutz rifles very much at all you will see bolt housings with casting flaws and cracks, broken ejection stops, parts that are not heat treated properly or not heat treated at all and other manufacturing flaws right out of the box. For the high prices that Anschutz charges for its rifles, the bolt housings and trigger housings should be cnc machined out of billet not cast. The relief hole not being able to vent off the explosion tells us that the bolt housing probably had a serious casting flaw. Before we leave home for every match, we inspect our bolt housings for cracks and flaws. Pat and Allen, thanks for posting this. It is a good safety reminder.
- dustinflint
- Expert Master Poster
- Posts: 1519
- Joined: Tue May 17, 2011 12:13 pm
- Location: Baton Rouge, Louisiana
Re: bolt failure
First, it's important to not shoot garbage Eley ammo and shoot LAPUA!
Second, that bolt should be able to handle a ruptured case. Anschutz needs to figure that out quick before some Eley shooter gets injured!
Dustin
Second, that bolt should be able to handle a ruptured case. Anschutz needs to figure that out quick before some Eley shooter gets injured!
Dustin
-
- Distinguished Master Poster w/Palms
- Posts: 2326
- Joined: Sun May 08, 2011 3:06 pm
Re: bolt failure
I saw pictures and know the guy. That bolt failed. There is no way a 22LR cartridge should be able to mechanically break a modern action.
Emmett Dibble, Houston, Texas. Where's my buddy Jason? Keeper of electronic records and banisher of little pieces of paper?
- psteiger
- AAA Poster
- Posts: 773
- Joined: Fri Jun 09, 2006 10:45 am
- Location: Friendswood, Texas
Re: bolt failure
I don't know. I just welded the swinger back together at the range. There is a bit of force there. Makes me want to zyglo my bolts. Emmett, you ever done any of that?
Dustin, It was a dare and you called me on it. I will never dare you to post anything again. LOL. At least you didn't put Lapua rules Eley drools.....or the other thing.......
Dustin, It was a dare and you called me on it. I will never dare you to post anything again. LOL. At least you didn't put Lapua rules Eley drools.....or the other thing.......
- dustinflint
- Expert Master Poster
- Posts: 1519
- Joined: Tue May 17, 2011 12:13 pm
- Location: Baton Rouge, Louisiana
Re: bolt failure
I will have "Eley Sucks, Shoot LAPUA!" T-shirts available for sale at the next match.
Maybe we will do some green ones at the Shamrock match - .22LR bash-fest at an airgun match.
Dustin
- DavidABQ
- Expert Master Poster
- Posts: 1819
- Joined: Mon Jul 27, 2009 9:33 pm
Re: bolt failure
No, but it would have tasted richer with the blue corn chips.
I had chicken enchiladas this weekend with blue corn tortillas. They turn a good meal into an outstanding meal!
- DavidABQ
- Expert Master Poster
- Posts: 1819
- Joined: Mon Jul 27, 2009 9:33 pm
Re: bolt failure
I was worried about my 1712 blowing up in my face but I shoot SK ammo so I should ok.dustinflint wrote: ↑Mon Mar 04, 2019 10:12 am First, it's important to not shoot garbage Eley ammo and shoot LAPUA!
Second, that bolt should be able to handle a ruptured case. Anschutz needs to figure that out quick before some Eley shooter gets injured!
Dustin
![Rock on \m/](./images/smilies/111.gif)
-
- AAA Poster
- Posts: 630
- Joined: Thu Aug 08, 2013 9:18 pm
Re: bolt failure
atomicbrh wrote: ↑Mon Mar 04, 2019 7:21 am Eley will say it was the rifle. Anschutz will say it was the cartridge.
If you work with Anschutz rifles very much at all you will see bolt housings with casting flaws and cracks, broken ejection stops, parts that are not heat treated properly or not heat treated at all and other manufacturing flaws right out of the box. For the high prices that Anschutz charges for its rifles, the bolt housings and trigger housings should be cnc machined out of billet not cast. The relief hole not being able to vent off the explosion tells us that the bolt housing probably had a serious casting flaw. Before we leave home for every match, we inspect our bolt housings for cracks and flaws. Pat and Allen, thanks for posting this. It is a good safety reminder.
What do you consider a bolt housing? No such official name in parts diagrams
-
- Master Poster
- Posts: 1293
- Joined: Sat Apr 15, 2006 7:24 pm
- Location: Rural Mississippi
Re: bolt failure
Zoran, just another name for the bolt body that "houses" the firing pin and spring assembly internally and the bolt handle/locking lug assembly externally.
Bobby H
Bobby H
-
- Master Poster
- Posts: 1293
- Joined: Sat Apr 15, 2006 7:24 pm
- Location: Rural Mississippi
Re: bolt failure
Has anybody reamed and installed a guide bushing in the firing pin channel in the bolt body to make firing pin travel more precise and prevent the firing pin channel from wearing out? The bolt body is just a cast part and that firing pin is travelling with great force. I think flexhone makes an abrasive ball hone small enough to put a crosshatch in that size bushing to aid in lubrication. Same principle as honing valve guides in an engine.