knock over big bore rams
-
- AA Poster
- Posts: 323
- Joined: Sat Sep 03, 2016 5:49 pm
- Location: Springfield, Louisiana
knock over big bore rams
How fast do I need to send a 200 grain lead round nose bullet to take down the big bore ram at 200 yards? I am using my Henry .357 magnum with a 1:16 twist 20 inch octagon barrel. Thanks Ken
-
- AA Poster
- Posts: 323
- Joined: Sat Sep 03, 2016 5:49 pm
- Location: Springfield, Louisiana
Re: knock over big bore rams
I was able to shoot some different loads through the chronograph this afternoon.
5 rounds of 9.0 grains of 2400 with the 200 grain Magnus bullet. 1203, 1183, 1163, 1205, 1167 fps. Hi:1205, Lo:1163, Ave:1184, ES:42, SD:19
5 rounds of Hornady 180 grain XTP with 13.6 grains of Lil Gun. 1450, 1457, 1476, 1486, 1473 fps. Hi:1486, Lo:1450, Ave:1468, ES:36, SD:14
4 rounds of Hornady 158 grain XTP with 14.0 grains of Lil Gun. 1718, 1675, 1650, 1700 fps. Hi:1718, Lo: 1650, Ave: 1685, ES: 68, SD: 29
The barrel heated up a lot hotter with the Lil Gun loads. I hope the 200 grain Maguns bullet will take the big bore rams down everytime that I can manage to hit one. Ken
5 rounds of 9.0 grains of 2400 with the 200 grain Magnus bullet. 1203, 1183, 1163, 1205, 1167 fps. Hi:1205, Lo:1163, Ave:1184, ES:42, SD:19
5 rounds of Hornady 180 grain XTP with 13.6 grains of Lil Gun. 1450, 1457, 1476, 1486, 1473 fps. Hi:1486, Lo:1450, Ave:1468, ES:36, SD:14
4 rounds of Hornady 158 grain XTP with 14.0 grains of Lil Gun. 1718, 1675, 1650, 1700 fps. Hi:1718, Lo: 1650, Ave: 1685, ES: 68, SD: 29
The barrel heated up a lot hotter with the Lil Gun loads. I hope the 200 grain Maguns bullet will take the big bore rams down everytime that I can manage to hit one. Ken
-
- AA Poster
- Posts: 270
- Joined: Sat Aug 12, 2006 11:26 am
- Location: Oro Valley, Arizona
Re: knock over big bore rams
HI, KEN,
CAN YOU SHARE YOUR RESULTS AFTER USING THESE LOADS ON RAMS?
THANKS!
CAN YOU SHARE YOUR RESULTS AFTER USING THESE LOADS ON RAMS?
THANKS!
Joaquin B
-
- AA Poster
- Posts: 268
- Joined: Sun Apr 19, 2015 8:53 pm
- Location: Chattanooga Tennessee
Re: knock over big bore rams
To see which 357 mag load that will take down a full sized ram is to c clamp a chicken low on the ram and shoot it. If the load takes the ram/chicken over and does not show pressure signs then you got your load. You are going for 100% knock down. Anything less it is time to get a 30-30.
-
- AAA Poster
- Posts: 615
- Joined: Thu Apr 13, 2006 3:24 pm
- TheBugFather
- AAA Poster
- Posts: 838
- Joined: Thu Jul 08, 2010 3:14 am
- Location: So. California
Re: knock over big bore rams
So far for me, I've been okay with a subsonic load of 1080 fps.
Simple testing at Raton showed around 90%+ went down with one hit.
Working on a heavier bullet, I'll be testing a 215gr and a 220 gr, version in the next few weeks.
The lead bullets at slower speeds seem to do much better than the jacked bullets, they tend to smoosh rather than pop on the targets.
Probably more dwell time on the target.
I'm also experimenting with a 220 grain version in the 30-30, also subsonic.
not a big fan of recoil and working on loads for my young son.
Dennis
Simple testing at Raton showed around 90%+ went down with one hit.
Working on a heavier bullet, I'll be testing a 215gr and a 220 gr, version in the next few weeks.
The lead bullets at slower speeds seem to do much better than the jacked bullets, they tend to smoosh rather than pop on the targets.
Probably more dwell time on the target.
I'm also experimenting with a 220 grain version in the 30-30, also subsonic.
not a big fan of recoil and working on loads for my young son.
Dennis
The Bug Father
...I don't like recoil, but I love to experiment.
...I don't like recoil, but I love to experiment.
-
- A Poster
- Posts: 169
- Joined: Fri Oct 31, 2014 12:57 pm
- Location: Great state of TEXAS!
Re: knock over big bore rams
My 260 38-55 slays the rams without the punch in the shoulder!
-
- AA Poster
- Posts: 323
- Joined: Sat Sep 03, 2016 5:49 pm
- Location: Springfield, Louisiana
Re: knock over big bore rams
I never had a chance to get a good zero for the 200 grain bullets. I was able to get a rough zero just before I shot rams. I had to make sight adjustments as I was shooting. Sadly I only hit 1 ram. It went down without any problems. I do think the 200 grain bullet load will take the rams down. I do want to do more testing with this load before I make a final decision. But from what Jerry (my spotter) said, it was a solid hit and that ram went down.
-
- B Poster
- Posts: 19
- Joined: Sun Jul 26, 2015 2:52 pm
Re: knock over big bore rams
I had success with your setup using 180 seirra (#8370) at max load.
Mag primers
13.5 grains of win 296
For all else I was using xtp 140s with 16.5 grains of win 296.
Good luck. Build up to max load!!
Mag primers
13.5 grains of win 296
For all else I was using xtp 140s with 16.5 grains of win 296.
Good luck. Build up to max load!!