What 6mm/243 bullets are you using on Rams?

More expensive to feed, but worth it.
User avatar
SteveD
AA Poster
AA Poster
Posts: 349
Joined: Thu Sep 03, 2015 9:33 pm
Location: Dayton, OH
Contact:

What 6mm/243 bullets are you using on Rams?

Post by SteveD »

If you are shooting any 6mm/243 cartridge such as 6BR, 6 Creedmore, 243 Win, 6mm Remington, 6 CX, 6X47 Lapua or any other cartridge or variant, what bullet are you using on Rams? What other bullets have you tried?

Please share any experiences, results, thoughts, postulations, future plans and snide comments you may have. %-( :D Please limit the conversation to 6mm/243

If you would also share what bullet you are using for C, P and T, that would be helpful too.

I have Sierra 107gr MK's (the new pointier version) for C, P and T and I have a few other bullets to try for Rams when I get back to Phoenix. I talked a the Hornady Rep at the SHOT Show last week. He seemed to understand the question and had some input. Based on his recommendation I am going to try some Hornady ELD-X bullets. They introduced them a few years ago but initially didn't have a 6mm/243 offering. I think they introduced that last year. The claim a G1 BC of .512 so you give up quite a bit in wind deflection at Rams but maybe the construction will make up for it.

I asked the Hornady Rep about their bonded bullets. He explained that the methods used for bonding did not allow the concentricity of the core to be adequately controlled, even if a post bonding swaging step was added. That would explain why I keep hearing that bonded bullets "just don't shoot". He went on to say that the construction ELD-X was Hornady's answer to providing a tough bullet that will shoot. I don't expect it to keep up with a Berger, SMK or DTAC (also made my Sierra) but perhaps it will be good enough.




To summarize reports thus far;

Sierra 107gr Matchking, 2
Sierra 110gr Matchking, 1
DTAC 115gr, 2
Hornady 105 V-Max, 1

110 SMk traveling 2809fps, 8 out of 9

107 MKs with good results on rams. Lost a few but that's a given with the light bullets.

Sierra 107's at 2850 fps for the rams and didn't loose very many. a low shot right above the front leg was the big looser and the back half of the animal was the place to hit with the most success

115grain D-Tac bullets for rams, velocity is 2650fps

Hornady 105 v-max, 243 Winchester. No success rate reported

I know of someone else using DTAC 115's that is not on this site very often
Last edited by SteveD on Sun Feb 04, 2018 5:31 pm, edited 1 time in total.
Image
User avatar
Another Dang 9
Master Poster
Master Poster
Posts: 1333
Joined: Thu Dec 10, 2009 7:24 pm
Location: The Peoples Republic of Massachusetts

Re: What 6mm/243 bullets are you using on Rams?

Post by Another Dang 9 »

When I shot my .243 win I was using the 107 MKs with good results on rams. Lost a few but that's a given with the light bullets.
Its a dog eat dog world and I'm wearing milk bone underwear.
NRA Endowment Member
Jerry G
Uber Master Poster
Uber Master Poster
Posts: 2746
Joined: Wed Apr 12, 2006 2:34 pm
Location: Casa Grande, AZ

Re: What 6mm/243 bullets are you using on Rams?

Post by Jerry G »

I also used the Sierra 107's at 2850 fps for the rams and didn't loose very many. a low shot right above the front leg was the big looser and the back half of the animal was the place to hit with the most success.
User avatar
cslcAl
Master Poster
Master Poster
Posts: 1029
Joined: Wed Dec 07, 2005 4:15 pm
Location: Montoursville, Pa.
Contact:

Re: What 6mm/243 bullets are you using on Rams?

Post by cslcAl »

I’m using a Sierra 110 MK in my 6BR. The BC is .617. I will be shooting my first match with them at Ben Avery this Sunday. I report back later.
I hope I hit some!!!

Al Foust
Team Sierra Member
kevinbear
AAA Poster
AAA Poster
Posts: 967
Joined: Sat Mar 03, 2007 10:16 am
Location: Parker Colorado

Re: What 6mm/243 bullets are you using on Rams?

Post by kevinbear »

I use 115grain D-Tac bullets for rams and 95gr sierra matchkings for the closer targets although I'm thinking about going to 107's because I've lost a couple of pigs. Velocity is 2650fps with 115's and 2750fps with 95's from my 6x47 Remington. I've heard that the 115's are made by sierra for David Tubb, regardless they're amazing in the wind but don't always topple the ram targets.
AAA Shooter politically incorrect and loving it
danthebulldog
B Poster
B Poster
Posts: 64
Joined: Mon Mar 05, 2012 10:30 pm
Location: el paso tx
Contact:

Re: What 6mm/243 bullets are you using on Rams?

Post by danthebulldog »

I used the Hornady 105 v-max, and the powder I used was imr 4064, I don’t remember what grains I used. It worked great for me when I would use my 243 Winchester.
User avatar
SteveD
AA Poster
AA Poster
Posts: 349
Joined: Thu Sep 03, 2015 9:33 pm
Location: Dayton, OH
Contact:

Re: What 6mm/243 bullets are you using on Rams?

Post by SteveD »

Sierra does make the DTAC 115. It is one of the bullets I have in my back pocket if all else fails and I want to avoid going to 6.5BR. Rumor has it that it will perform adequately with an 8 twist barrel.

I think the ELD-X is supposed to be similar to the A-Max in ballistic performance but more heavily constructed for penetration.
Image
User avatar
SteveD
AA Poster
AA Poster
Posts: 349
Joined: Thu Sep 03, 2015 9:33 pm
Location: Dayton, OH
Contact:

Re: What 6mm/243 bullets are you using on Rams?

Post by SteveD »

cslcAl wrote: Wed Jan 31, 2018 6:49 pm I’m using a Sierra 110 MK in my 6BR. The BC is .617. I will be shooting my first match with them at Ben Avery this Sunday. I report back later.
I hope I hit some!!!

Al Foust
That would be greatly appreciated Al.
Image
User avatar
DavidABQ
Expert Master Poster
Expert Master Poster
Posts: 1818
Joined: Mon Jul 27, 2009 9:33 pm

Re: What 6mm/243 bullets are you using on Rams?

Post by DavidABQ »

Will a 6mm even knock over a ram?
User avatar
SteveD
AA Poster
AA Poster
Posts: 349
Joined: Thu Sep 03, 2015 9:33 pm
Location: Dayton, OH
Contact:

Re: What 6mm/243 bullets are you using on Rams?

Post by SteveD »

DavidABQ wrote: Thu Feb 01, 2018 11:24 am Will a 6mm even knock over a ram?
I have seen it happen but hitting the Ram seems to be an important prerequisite.
Image
Doodaddy
AAA Poster
AAA Poster
Posts: 684
Joined: Tue Jun 11, 2013 3:07 pm
Location: West Monroe, LA

Re: What 6mm/243 bullets are you using on Rams?

Post by Doodaddy »

I think Cathy Winstead shoots 6BR and does well with it.
I am NOT Danny Hatch. Image
User avatar
Another Dang 9
Master Poster
Master Poster
Posts: 1333
Joined: Thu Dec 10, 2009 7:24 pm
Location: The Peoples Republic of Massachusetts

Re: What 6mm/243 bullets are you using on Rams?

Post by Another Dang 9 »

What twist rates are you guys using with the 110MKs and 115 DTACs?
Its a dog eat dog world and I'm wearing milk bone underwear.
NRA Endowment Member
kevinbear
AAA Poster
AAA Poster
Posts: 967
Joined: Sat Mar 03, 2007 10:16 am
Location: Parker Colorado

Re: What 6mm/243 bullets are you using on Rams?

Post by kevinbear »

1-8" twist works well with 115gr. bullets.
Last edited by kevinbear on Fri Feb 02, 2018 7:06 am, edited 1 time in total.
AAA Shooter politically incorrect and loving it
User avatar
cslcAl
Master Poster
Master Poster
Posts: 1029
Joined: Wed Dec 07, 2005 4:15 pm
Location: Montoursville, Pa.
Contact:

Re: What 6mm/243 bullets are you using on Rams?

Post by cslcAl »

Mine is a 1-7 twist.

Al Foust
Team Sierra Member
User avatar
ShootingStar
AA Poster
AA Poster
Posts: 395
Joined: Sun Apr 19, 2009 2:47 pm
Location: Asheville, NC
Contact:

Re: What 6mm/243 bullets are you using on Rams?

Post by ShootingStar »

I thought Cathy uses a 6x47 Lapua for High Power.
Don't forget, you have to have her ability to place the shots where the Ram will fall!!
Not many of us mere mortals have that level of skill!!!

ShootingStar
Post Reply