Hello from New Zealand and help with 6.5TCU loads

More expensive to feed, but worth it.
mikee
Unclassified Poster
Posts: 9
Joined: Wed Apr 08, 2015 12:50 am

Re: Hello from New Zealand and help with 6.5TCU loads

Post by mikee »

Jerry G wrote:If you are having feed problems from the magazine, usually an adjustment to the lips on the mag are all that is needed. It is either feeding the point of the bullets too high or too low. Bending the lips on top of the mag one way or the other should cure that.

Thanks Jerry, unfortunately my 6.5TCU has an integral mag as its based off a M700 ADL Action
Post Reply