What sights for Marlins?
-
- AA Poster
- Posts: 372
- Joined: Wed Jan 10, 2007 8:23 am
What sights for Marlins?
I am in the process of preparing a set of Marlins: 39A, 1894CB Cowboy (.44 Mag), and 336CB Cowboy (30-30).
Any thoughts on the height (low, medium, high) Lyman 17A front sight for various Marlins? Alternatives to the Lyman? (Your favorite insert for the front sight?)
What about rear sights? Williams receiver or...? What about a Shaver (or other) tang sight?
And then there is the matter of an adjustable iris for the rear sight and/or any lens to help see the front sight.
Thanks in advance for any thoughts,
Rick
Any thoughts on the height (low, medium, high) Lyman 17A front sight for various Marlins? Alternatives to the Lyman? (Your favorite insert for the front sight?)
What about rear sights? Williams receiver or...? What about a Shaver (or other) tang sight?
And then there is the matter of an adjustable iris for the rear sight and/or any lens to help see the front sight.
Thanks in advance for any thoughts,
Rick
-
- AAA Poster
- Posts: 535
- Joined: Mon Oct 13, 2008 6:28 am
- Location: Bradford, PA
- Contact:
Re: What sights for Marlins?
Rick
My wife and I shoot williams fp series on 3 guns and the other 2 guns i shoot lyman 57.I like them both.Cant see alot of difference in them.In the front it depends on if your dove tail is in a ramp or in the barrel.If it has a ramp like a 39a then you will want the short lyman 17a(.404 if i recall).If it is in the barrel like I think your 44 mag is then you will want a high 17a(.589 if i recall).For inserts for sb and pc i use a short post,alot of guys i know use the bead.In long range i use the bead.Hope this helps you.My wife is in the process of getting a merrit adjustable appeture.I use the lyman .040 on all 3 guns.
My wife and I shoot williams fp series on 3 guns and the other 2 guns i shoot lyman 57.I like them both.Cant see alot of difference in them.In the front it depends on if your dove tail is in a ramp or in the barrel.If it has a ramp like a 39a then you will want the short lyman 17a(.404 if i recall).If it is in the barrel like I think your 44 mag is then you will want a high 17a(.589 if i recall).For inserts for sb and pc i use a short post,alot of guys i know use the bead.In long range i use the bead.Hope this helps you.My wife is in the process of getting a merrit adjustable appeture.I use the lyman .040 on all 3 guns.
-
- A Poster
- Posts: 108
- Joined: Sat Oct 25, 2008 11:32 am
Re: What sights for Marlins?
I use a Marbles tang sight for all my Marlins. I got an 1897 CB that came with one and a 17A front sight and liked the setup so much that I changed all of my Marlins to the tang sight. The Marbles sight is more expensive ($120 list, $85 FFL) but it gives about 2-3 inches more sight radius. The difference is at least as much as the difference between a Leupold and a cheaper scope with nowhere near as much increase in cost.
-
- AA Poster
- Posts: 372
- Joined: Wed Jan 10, 2007 8:23 am
Re: What sights for Marlins?
Thanks.
Now to dig into the catalogs.
Now to dig into the catalogs.
-
- A Poster
- Posts: 153
- Joined: Sun May 27, 2007 6:19 am
- Location: Bradford - MCRC
Re: What sights for Marlins?
I like Redfields the best. Hard to find, but worth it. Although, I have an old Lyman on my 336A that is an awesome sight. I will say they aren't cheap. I did manage to get one here recently for $52 and change. But, have seen them going for over $100.00. I also put the target knobs on the elevation screws for all of them. For the front all 17A's, but I do have a redfield on one of them.