First loads...
-
- A Poster
- Posts: 111
- Joined: Sat Feb 26, 2022 7:56 am
First loads...
I'm finally up & runnin' to load 30-30 and 32-20. So far, so good. Load development/testing in progress.
You do not have the required permissions to view the files attached to this post.
-
- A Poster
- Posts: 217
- Joined: Fri Aug 31, 2007 10:22 am
- Location: Philadelphia, PA
Re: First loads...
30-30 loads are all over the place but 32-20 loads are easy. Try 4.5 grains of unique with a 115 grain cast bullet. It's right out of the Lyman book and works fine for me.
Rick B.
Rick B.
Richard
-
- A Poster
- Posts: 111
- Joined: Sat Feb 26, 2022 7:56 am
Re: First loads...
Richard, Unique is impossible to find in my area but I have a lot of IMR4227 and A5744 on hand. Lyman shows loads for both and I'm confident I can pin down a good load with one or the other.
My 30-30 loves A5744 and it will be my go to powder in that caliber.
My 30-30 loves A5744 and it will be my go to powder in that caliber.
-
- AAA Poster
- Posts: 616
- Joined: Thu Apr 13, 2006 3:24 pm
Re: First loads...
I never can find 5744. There are a lot of powders that work well in the 32 like Lilgun, Titegroup, and super field.
- Joe
-
- A Poster
- Posts: 204
- Joined: Thu Aug 06, 2009 3:41 pm
Re: First loads...
Edgehit, Shooters World has a powder that is supposed to be identical to 5744---I believe they call it Buffalo Rifle.