Anschutz trigger parts...
-
- Distinguished Master Poster w/Palms
- Posts: 2324
- Joined: Sun May 08, 2011 3:06 pm
Anschutz trigger parts...
Does anyone have the part numbers for the pieces to turn a single stage into a dual stage trigger on the 1710/12 rifles?
Emmett Dibble, Houston, Texas. Where's my buddy Jason? Keeper of electronic records and banisher of little pieces of paper?
-
- AAA Poster
- Posts: 630
- Joined: Thu Aug 08, 2013 9:18 pm
Re: Anschutz trigger parts...
I would call Neal at http://www.iss-internationalshootersservice.com/
He helped me with my 64 action trigger with the correct part when I used to have that long ago.
He helped me with my 64 action trigger with the correct part when I used to have that long ago.
-
- Distinguished Master Poster w/Palms
- Posts: 2324
- Joined: Sun May 08, 2011 3:06 pm
Re: Anschutz trigger parts...
(I have... lol)thauglor wrote: ↑Wed Nov 03, 2021 5:30 am I would call Neal at http://www.iss-internationalshootersservice.com/
He helped me with my 64 action trigger with the correct part when I used to have that long ago.
Emmett Dibble, Houston, Texas. Where's my buddy Jason? Keeper of electronic records and banisher of little pieces of paper?
-
- AAA Poster
- Posts: 630
- Joined: Thu Aug 08, 2013 9:18 pm
Re: Anschutz trigger parts...
Damn, if he doesn't know I don't know anyone else, I am guessing you tried anshcutz north america?
-
- Distinguished Master Poster w/Palms
- Posts: 2324
- Joined: Sun May 08, 2011 3:06 pm
Re: Anschutz trigger parts...
I have a message in to ANA. The last time I needed parts I had to call... I'll give them a day or three.
Emmett Dibble, Houston, Texas. Where's my buddy Jason? Keeper of electronic records and banisher of little pieces of paper?
-
- AA Poster
- Posts: 296
- Joined: Sun Dec 26, 2010 9:29 am
Re: Anschutz trigger parts...
Neal Steppe only works on match rifles …
He will work on an Anschutz 54 match trigger
He will also work on Hunter class smallbore if :
It is a 5018 or 5071 variant
He will work on an Anschutz 54 match trigger
He will also work on Hunter class smallbore if :
It is a 5018 or 5071 variant
-
- Distinguished Master Poster w/Palms
- Posts: 2324
- Joined: Sun May 08, 2011 3:06 pm
Re: Anschutz trigger parts...
These 2 parts are the difference between single and 2 stage.
The 2 parts on the left he used to supply to change a single to a 2 stage.
Different springs for different weight ranges.
He doesn’t any more….
ANA doesn’t supply trigger parts either.
If you want to change now you have to buy a complete trigger….
It is what it is….
The 2 parts on the left he used to supply to change a single to a 2 stage.
Different springs for different weight ranges.
He doesn’t any more….
ANA doesn’t supply trigger parts either.
If you want to change now you have to buy a complete trigger….
It is what it is….
Emmett Dibble, Houston, Texas. Where's my buddy Jason? Keeper of electronic records and banisher of little pieces of paper?
-
- Master Poster
- Posts: 1293
- Joined: Sat Apr 15, 2006 7:24 pm
- Location: Rural Mississippi
Re: Anschutz trigger parts...
If Anschutz would make the parts, Stepp and ANA could stock and sell them.
Anschutz only promises parts supply for two years after the production of a rifle.
I saw it in the fine print somewhere.
That is not much support for such a expensive product.
Anschutz only promises parts supply for two years after the production of a rifle.
I saw it in the fine print somewhere.
That is not much support for such a expensive product.
- acorneau
- AAA Poster
- Posts: 888
- Joined: Sun Feb 22, 2015 12:12 pm
- Location: Houston
Re: Anschutz trigger parts...
When I contacted Neil for two-stage trigger conversion parts for my 1710 this is all he sent...
Perhaps it was specific to my 1710 (wing safety) but Pat Steiger confirmed that this was the part I needed. Never got a parts list or anything so I can't say what the official part number would be.
Perhaps it was specific to my 1710 (wing safety) but Pat Steiger confirmed that this was the part I needed. Never got a parts list or anything so I can't say what the official part number would be.
You do not have the required permissions to view the files attached to this post.
Allen Corneau
-
- Distinguished Master Poster w/Palms
- Posts: 2324
- Joined: Sun May 08, 2011 3:06 pm
Re: Anschutz trigger parts...
(That ship has sailed… )
Emmett Dibble, Houston, Texas. Where's my buddy Jason? Keeper of electronic records and banisher of little pieces of paper?