Weathersby Style Riser for 11mm

This is what we do.
Post Reply
Heavybarrell
A Poster
A Poster
Posts: 118
Joined: Sun Mar 08, 2009 5:33 pm

Weathersby Style Riser for 11mm

Post by Heavybarrell »

A friend of mine is looking for a Weathersby style riser. I dont know if anyone makes this style anymore or if anyone has one that wants to part with it. Any information is greatly appreciated!

Thanks, Butch
rogersptl
A Poster
A Poster
Posts: 246
Joined: Wed May 16, 2007 8:12 pm
Location: Lander WY

Re: Weathersby Style Riser for 11mm

Post by rogersptl »

Check with cathy at goodshootinginc.com she handles the BKL risers & blocks.
Close only counts with grenades and horseshoes.
ywltzucanrknrl
A Poster
A Poster
Posts: 203
Joined: Thu Aug 06, 2009 3:41 pm

Re: Weathersby Style Riser for 11mm

Post by ywltzucanrknrl »

I have some 11mm risers I would sell, but I'm not familiar with Weathersby's style.

Mine look very similar to the bases pictured at the bottom, except they are cut for a 11mm receiver. Sorry, I couldn't find the picture of them, but if these look similar to what you are looking for, I'll send a picture of the actual risers.

If he is looking for the type that attach via screws to the barrel and are the 11mm base, I also have some of those in different heights, but mainly 1/4 or 3/8".

Do you have a picture of what you are looking for?
You do not have the required permissions to view the files attached to this post.
Heavybarrell
A Poster
A Poster
Posts: 118
Joined: Sun Mar 08, 2009 5:33 pm

Re: Weathersby Style Riser for 11mm

Post by Heavybarrell »

Like your top picture but a clamp on for 22 rail.

Thanks, Butch
44 mag
AAA Poster
AAA Poster
Posts: 535
Joined: Mon Oct 13, 2008 6:28 am
Location: Bradford, PA
Contact:

Re: Weathersby Style Riser for 11mm

Post by 44 mag »

I think I have one. Mine will put the bottom of the scope at 1 7/8”. Send me a pm with a cell number and I will dish it out and send some pics. It was on a Anschutz so I am sure it is 11mm.
Heavybarrell
A Poster
A Poster
Posts: 118
Joined: Sun Mar 08, 2009 5:33 pm

Re: Weathersby Style Riser for 11mm

Post by Heavybarrell »

Thanks for everyone's help. He went the BKL route.

Butch
Post Reply