32-20 Loads

Centerfires, rimfires, pistol cartridges and everything in between.
Post Reply
m51
Unclassified Poster
Posts: 1
Joined: Mon Jun 30, 2014 12:02 pm

32-20 Loads

Post by m51 »

Starting to load for 32-20. Have a few hundred Speer 100 gr bullets. What would anyone's recommendation be for powder and load. Thanks
44 mag
AAA Poster
AAA Poster
Posts: 535
Joined: Mon Oct 13, 2008 6:28 am
Location: Bradford, PA
Contact:

Re: 32-20 Loads

Post by 44 mag »

My Marlin like IMR 4227. Tried unique but 4227 was much better. I shoot 11.0 grains with a 100 grain bullet.
glen ring
Master Poster
Master Poster
Posts: 1084
Joined: Wed Oct 25, 2006 3:04 pm

Re: 32-20 Loads

Post by glen ring »

We use a 100 grain xtp bullet and IMR-4198 load straight out of the Lyman manual as being an accuracy load. Both of our guns like this load. I have put scopes on both of our Marlin 1894cl guns and tried slow cast bullets and very fast jacketed bullets. Both guns like a jacketed bullet in the 1100 to 1200 fps range. Very slow lead bullets are fun, but we like the 1200 fps jacketed bullets better. I have older Speer and Hodgdon manuals that list jacketed bullet loads around 1800 fps and one of the loads in the Speer manual is using SR-4759. PM me if you want what I have found.
Just Be Nice **==
dgslyr
B Poster
B Poster
Posts: 44
Joined: Sun Aug 16, 2009 6:02 pm
Location: Northwest Texas

Re: 32-20 Loads

Post by dgslyr »

I use 10.5 grs.of IMR 4227 with a 115 gr.cast bullet from Hunters Supply.When the Post Office doesn't lose them.They go 1406 fps SD is 14 fps ES is 32 fps.
I tried 10 grs of 2400 .They group about an inch at 100 till the barrel leads up.Those smack the chickens up the berm and I got leading. 9 grs of 2400 was OK but still got some leading .
User avatar
Tlee
AAA Poster
AAA Poster
Posts: 679
Joined: Wed Feb 21, 2007 9:55 am
Location: Where Bob Wills is still the King
Contact:

Re: 32-20 Loads

Post by Tlee »

4.0 to 4.5gr of WSF works well for me with 85gr to 110gr Jacketed. No recoil and accurate with plenty of knockdown.
- Tim
User avatar
cslcAl
Master Poster
Master Poster
Posts: 1029
Joined: Wed Dec 07, 2005 4:15 pm
Location: Montoursville, Pa.
Contact:

Re: 32-20 Loads

Post by cslcAl »

I'm using 7.5 grs of LiL Gun with a 90 gr Sierra HP.

Al Foust
Team Sierra Member
User avatar
Another Dang 9
Master Poster
Master Poster
Posts: 1333
Joined: Thu Dec 10, 2009 7:24 pm
Location: The Peoples Republic of Massachusetts

Re: 32-20 Loads

Post by Another Dang 9 »

I use Unique in my Browning with speer 100gr. bullets. Only powder it shot well with.
Its a dog eat dog world and I'm wearing milk bone underwear.
NRA Endowment Member
L. Rivard
B Poster
B Poster
Posts: 53
Joined: Wed Dec 29, 2010 10:04 am

Re: 32-20 Loads

Post by L. Rivard »

I have been quite happy with a load of 6.8 gr of Blue Dot behind a 117 gr cast moly coated simi wadcutter from Bear Creek Supply in Waterford CA. Velocity is kind of high at 1400 fps, but zero leading and about two and a half inch groups at 100 meters. Thats about as good as I can hold irons with anything.
User avatar
timfinle
A Poster
A Poster
Posts: 166
Joined: Fri Dec 08, 2006 1:15 am
Location: Arizona

Re: 32-20 Loads

Post by timfinle »

I use a hornady 100 grain xtp over 17 grains of 2015. this is a compressed load and very accurate. I also use a wolf small pistol magnum primer to a get a good burn. Good luck. The bullet is traveling about 1600 ft per sec.

Tim
tim
Post Reply