44-40 brass dimensions
- bitterbeer
- B Poster
- Posts: 19
- Joined: Wed Mar 22, 2017 7:08 pm
44-40 brass dimensions
Bought some starline brass to start some reloading for my 44-40 Winchester. The dimensions listed in my reloading book show it have a distinct but small bottle neck but the starline has no bottleneck. I’m assuming this is fine but curious as to why.
- Another Dang 9
- Master Poster
- Posts: 1333
- Joined: Thu Dec 10, 2009 7:24 pm
- Location: The Peoples Republic of Massachusetts
Re: 44-40 brass dimensions
Bitterbeer most new unfired brass should be full lenth sized before loading. Try and chamber a few rounds as they are now. If they have any resistance to load then they will need to be sized before loading.
Its a dog eat dog world and I'm wearing milk bone underwear.
NRA Endowment Member
NRA Endowment Member
-
- AA Poster
- Posts: 275
- Joined: Mon Jun 13, 2016 7:40 pm
- Location: Ft. Laramie
Re: 44-40 brass dimensions
The Starline brass does in fact come as a straight brass, if you run it thru the size die it will form the shoulder, and after it's loaded and fired it will be fully formed, but will be a bit short.
I and my rifle prefer Winchester brass.
I and my rifle prefer Winchester brass.
- bitterbeer
- B Poster
- Posts: 19
- Joined: Wed Mar 22, 2017 7:08 pm
Re: 44-40 brass dimensions
Gotcha ... need to buy my dies so that makes sense. Looking forward to get some rounds put together.
-
- AA Poster
- Posts: 275
- Joined: Mon Jun 13, 2016 7:40 pm
- Location: Ft. Laramie
Re: 44-40 brass dimensions
I'm using Hornady dies for the 32,38 and 44wcf.
- DAVIDMAGNUM
- A Poster
- Posts: 140
- Joined: Sat Oct 17, 2015 7:06 am
- Location: Middle of the Delmarva Penninsula
Re: 44-40 brass dimensions
44WCF and 38WCF brass from Starline needs to be "fireformed". After the first firing the brass will be the size and shape you are expecting. Due to the slightly lower internal volume of the new brass don't make the first load a maximum charge. After "fire forming" just follow the published load data for that caliber.
I actually have some new Starline brass loaded with Trailboss ready to fire form. I will send pictures tomorrow if I can remember.
I actually have some new Starline brass loaded with Trailboss ready to fire form. I will send pictures tomorrow if I can remember.
In the days of old when men were bold, and a quarter was still worth a dime.
Maryland's Eastern Shore
Maryland's Eastern Shore
- DAVIDMAGNUM
- A Poster
- Posts: 140
- Joined: Sat Oct 17, 2015 7:06 am
- Location: Middle of the Delmarva Penninsula
Re: 44-40 brass dimensions
The round on the left has a new unsized, unfired Starline brass case.
The round on the right has a fired, sized Starline brass case.
The difference is easier to see than capture with a cell phone camera.
The round on the right has a fired, sized Starline brass case.
The difference is easier to see than capture with a cell phone camera.
You do not have the required permissions to view the files attached to this post.
In the days of old when men were bold, and a quarter was still worth a dime.
Maryland's Eastern Shore
Maryland's Eastern Shore
- Merlin
- AAA Poster
- Posts: 771
- Joined: Wed Oct 22, 2008 6:56 pm
- Location: Friendswood, TX
Re: 44-40 brass dimensions
Wow.... Heavy crimp.....
"Only God can judge me." Merlin
"Merlin..Your'e a rimfire whore." God
NRA Lever Action Silhouette - You get more clang for your bang with lever action silhouette.....
TSRA Lifer
NRA Patriot Patron Lifer
"Merlin..Your'e a rimfire whore." God
NRA Lever Action Silhouette - You get more clang for your bang with lever action silhouette.....
TSRA Lifer
NRA Patriot Patron Lifer
- DAVIDMAGNUM
- A Poster
- Posts: 140
- Joined: Sat Oct 17, 2015 7:06 am
- Location: Middle of the Delmarva Penninsula
Re: 44-40 brass dimensions
Lee FCD. I love and hate the die. At least I don't crush any brass with a standard roll crimp die.
The boolit is my design. Just a Lyman 427098 with a crimp groove added. Accurate Molds 43-220C
I use it for black powder and smokeless. Gives me a heavier bullet but still lighter than the 240 grain types.
I saw that someone improved the bullet with a more shallow crimp grove. Accurate Molds 43-220CC. I have the mold but haven't cast any yet. Just don't need to at the moment. I have over a thousand rounds loaded and 800 bullets sized and lubed waiting......but no silhouette matches.
The new bullet with the shallow crimp groove may have me changing the crimp die.
As always many thanks to the late John Kort for helping turn a cantankerous rifle into the most accurate and fun firearm I have.
(okay, maybe I was the cantankerous one)
In the days of old when men were bold, and a quarter was still worth a dime.
Maryland's Eastern Shore
Maryland's Eastern Shore
-
- AA Poster
- Posts: 275
- Joined: Mon Jun 13, 2016 7:40 pm
- Location: Ft. Laramie
Re: 44-40 brass dimensions
I think a lot of the "accuracy" problems with the 44wcf have mostly been a function of not using the bullet diameter the rifle or handgun needs. Most modern made guns do much better with a .429 or .430 diameter bullet.
- DAVIDMAGNUM
- A Poster
- Posts: 140
- Joined: Sat Oct 17, 2015 7:06 am
- Location: Middle of the Delmarva Penninsula
Re: 44-40 brass dimensions
Don
.....and commercial cast bullets that are 1 or 2 thousandths smaller than advertised or hard cast bullets in low pressure loads.
There are a few reasons why I cast bullets now.
.....and commercial cast bullets that are 1 or 2 thousandths smaller than advertised or hard cast bullets in low pressure loads.
There are a few reasons why I cast bullets now.
In the days of old when men were bold, and a quarter was still worth a dime.
Maryland's Eastern Shore
Maryland's Eastern Shore