MARLIN CL 32-20

Centerfires, rimfires, pistol cartridges and everything in between.
Post Reply
dan222
A Poster
A Poster
Posts: 108
Joined: Tue Feb 06, 2007 5:42 pm
Location: delaware

MARLIN CL 32-20

Post by dan222 »

hi folks,
picked up marlin cl in 32-20, loaded up some new remington brass, with a light crimp. some chamber a little snug, just wondering if they will be better after fire forming, or go with starline brass. thanks.....dan
up date, did use fl die did not size the case down very much. loading the xtp in 85 & 100 gn, also the sierra 90 gn, using lee dies, will see how they reload after they fire form....dan
Last edited by dan222 on Thu Sep 22, 2016 4:59 am, edited 1 time in total.
glen ring
Master Poster
Master Poster
Posts: 1084
Joined: Wed Oct 25, 2006 3:04 pm

Re: MARLIN CL 32-20

Post by glen ring »

We have three in 32-20. I really like that round. We use starline brass, a 100 grain xtp and a recommended charge of 4198 straight out of the lyman loading manual. I have tried MANY different lead bullet loads with trail boss, titegroup, unique and I always come right back to the xtp bullet and 4198.
Just Be Nice **==
edgehit
AAA Poster
AAA Poster
Posts: 611
Joined: Thu Apr 13, 2006 3:24 pm

Re: MARLIN CL 32-20

Post by edgehit »

Check your bullet crimp and see if there's a pucker on the tight rounds, which will cause tightness.
- Joe
cedestech
Distinguished Master Poster w/Palms
Distinguished Master Poster w/Palms
Posts: 2324
Joined: Sun May 08, 2011 3:06 pm

Re: MARLIN CL 32-20

Post by cedestech »

edgehit wrote:Check your bullet crimp and see if there's a pucker on the tight rounds, which will cause tightness.
That.
Emmett Dibble, Houston, Texas. Where's my buddy Jason? Keeper of electronic records and banisher of little pieces of paper?
Steve Tapp
B Poster
B Poster
Posts: 91
Joined: Thu Jan 17, 2008 9:58 am
Location: Alma, AR

Re: MARLIN CL 32-20

Post by Steve Tapp »

I always full length size and TRIM to .010" less than max case length on new brass. A "long" case could cause the "bulging case" problem they're talking about. Glen, what range powder weights does the Lyman book recommend for which brand of 4198 ? looking for slower velocity than the 2200 f.p.s. Hornady loading manual lists for W296,H110 H4227, & Acc#9.Thanks, Steve
AMB
A Poster
A Poster
Posts: 152
Joined: Sun May 27, 2007 6:19 am
Location: Bradford - MCRC

Re: MARLIN CL 32-20

Post by AMB »

I'm not the anal reloader, but definitely first time through I full length and trim back...get them uniform. Also, few times when I forgot to to bell case mouths got some weird bulges(and crushed a couple). Back in the day for Hunter Pistol used Blue Dot. These days I'm using 4227 and the 100 gr Hornady, fairly potent, some of the guys are using a little bullseye and a 100 gr lead. I actually didnt get spectacular results off bench, but could have been my technique, yet they go where I point. I'm pretty confident in it, don't think I shot less than a Master score this past summer and set a Ram LR record. Al Bean
glen ring
Master Poster
Master Poster
Posts: 1084
Joined: Wed Oct 25, 2006 3:04 pm

Re: MARLIN CL 32-20

Post by glen ring »

Steve

The loads are in the Lyman manuals 49 and 50.
Just Be Nice **==
dan222
A Poster
A Poster
Posts: 108
Joined: Tue Feb 06, 2007 5:42 pm
Location: delaware

Re: MARLIN CL 32-20

Post by dan222 »

hi folks - range report,
got out today, with marlin cl 32-20, had a leupold 12x mounted on it. shot some groups at 50 yds, and the sierra 90 gn bullet shot
+/- an inch. the xtp 85gn went 1.5 or so. at 100 yds the sierra 90 gn was just a little over 1.5, and the 85 gn xtp was 3.0 +++.
all were loaded with imr 4227, 12 gns, on new rem brass. will try the reload 1x brass, and see the results. it appears the sierras shoot well in this gun. opened for loads and ideas. thanks for all the input........dan
dan222
A Poster
A Poster
Posts: 108
Joined: Tue Feb 06, 2007 5:42 pm
Location: delaware

Re: MARLIN CL 32-20

Post by dan222 »

hi folks,
looking at lyman's cast bullet handbook, it does list imr-4198.....dan
twidpa
B Poster
B Poster
Posts: 87
Joined: Wed Nov 24, 2010 7:20 pm

Re: MARLIN CL 32-20

Post by twidpa »

Most any of the lead I have tried with lesser amounts of 4227 can print groups smaller than 1 inch at 50 yards. Try some properly sized 115 grain LFP and see what you get.
T
Post Reply