Loctite loading gate
-
- AAA Poster
- Posts: 615
- Joined: Thu Apr 13, 2006 3:24 pm
Loctite loading gate
I'm speaking from experience when I recommend putting Loctite on the loading gate screw.
A half turn loosening of the screw was all it took for my Marlin 336 to lock up super tight on second chicken. I had to remove the butt stock and drive the finger lever screw out with a punch to clear the jam.
Be sure to use blue or purple strength!
A half turn loosening of the screw was all it took for my Marlin 336 to lock up super tight on second chicken. I had to remove the butt stock and drive the finger lever screw out with a punch to clear the jam.
Be sure to use blue or purple strength!
- Joe
- Merlin
- AAA Poster
- Posts: 771
- Joined: Wed Oct 22, 2008 6:56 pm
- Location: Friendswood, TX
Re: Loctite loading gate
Experience is a hard school.
Thanks for sharing.
Thanks for sharing.
"Only God can judge me." Merlin
"Merlin..Your'e a rimfire whore." God
NRA Lever Action Silhouette - You get more clang for your bang with lever action silhouette.....
TSRA Lifer
NRA Patriot Patron Lifer
"Merlin..Your'e a rimfire whore." God
NRA Lever Action Silhouette - You get more clang for your bang with lever action silhouette.....
TSRA Lifer
NRA Patriot Patron Lifer
-
- AA Poster
- Posts: 268
- Joined: Sun Apr 19, 2015 8:53 pm
- Location: Chattanooga Tennessee
Re: Loctite loading gate
Check them screws before/after a match. Loctite also helps.
-
- AAA Poster
- Posts: 615
- Joined: Thu Apr 13, 2006 3:24 pm
Re: Loctite loading gate
Its funny how karma works
I spotted for a competitor 2 relays before my turn to shoot. His Winchester 94's loading gate popped out. He couldn't load. I commented that "I always Loctite my loading gate screw!?"
Those chickens were a curse
I spotted for a competitor 2 relays before my turn to shoot. His Winchester 94's loading gate popped out. He couldn't load. I commented that "I always Loctite my loading gate screw!?"
Those chickens were a curse
- Joe