Correct Marbles tang sight for new Miroku 1873
-
- AAA Poster
- Posts: 563
- Joined: Sun Jan 29, 2006 4:39 pm
- Location: Central Pennsylvania
Correct Marbles tang sight for new Miroku 1873
I am confused on the correct tang sight for a new model Winchester repo 1873. Midway said the improved sight does not fit the repos, and the one that fits Uberti 1873 will not fit the Miroku. I also wanted to know if I need screws. I looked on Brownells, and it seemed to conflict with midways catalog. So I would appreciate some model numbers and maybe a vendor. Thanks.
-
- B Poster
- Posts: 90
- Joined: Thu Aug 16, 2007 10:43 am
- Location: Colorado
Re: Correct Marbles tang sight for new Miroku 1873
In this article the author states that he used a Marble's tang sight made for the Uberti 1873 on his Miroku/Winchester 1873 rifle. And he provides the relevant part numbers:
http://www.chuckhawks.com/marbles_tang_sight.htm
Cimarron Red
http://www.chuckhawks.com/marbles_tang_sight.htm
Cimarron Red
- Westy
- B Poster
- Posts: 65
- Joined: Sat Aug 17, 2013 2:52 pm
Re: Correct Marbles tang sight for new Miroku 1873
I have a couple of the newer Japchesters 357-92 and a 30-30-94 and I ordered a marbles tang sight from Brownells and you guessed it I know have a $140-00 paper weight sitting on my reloading bench
will try to sort out a way to mount it on this rifle-357 but I have been shooting well with open sights so I haven't mucked around with it at this point...
Darn tang mounted safety LOL
will try to sort out a way to mount it on this rifle-357 but I have been shooting well with open sights so I haven't mucked around with it at this point...
Darn tang mounted safety LOL
-
- AAA Poster
- Posts: 563
- Joined: Sun Jan 29, 2006 4:39 pm
- Location: Central Pennsylvania
Re: Correct Marbles tang sight for new Miroku 1873
Cimarron Red wrote:In this article the author states that he used a Marble's tang sight made for the Uberti 1873 on his Miroku/Winchester 1873 rifle. And he provides the relevant part numbers:
http://www.chuckhawks.com/marbles_tang_sight.htm
Cimarron Red
Thanks, that makes sense with the warning from Midway that the original 1873 will not fit the repo gun. I guess the repo tang is different from the original. The screws are still a question, because midway lists the same screws for the Uberti and miroku, and Brownells has different part numbers. I am going to call brownells and ask for conformation on the screws before I order.
The new 1873 does not have any tang safety like the new 1892 winchester. I guess the original lever safety was good enough for the lawyers.
-
- B Poster
- Posts: 82
- Joined: Sat Mar 10, 2007 3:24 pm
- Location: Caldwell, Texas
Re: Correct Marbles tang sight for new Miroku 1873
I was doing some checking on this rifle and found on Marbles site, the one you need is part # 009884 and the screws # is 995012