Page 1 of 1

anschutz superair 2002

Posted: Thu Jul 30, 2020 8:25 pm
by hondayamaha
just acquired a 2002 superair. IT has a cracked stock in the grid area any idea on a replacement stock?Does anything innerchange any help would be wonderfull.

Re: anschutz superair 2002

Posted: Fri Jul 31, 2020 7:08 am
by atomicbrh
Replacement stocks are usually more than what you paid for the rifle.
Drill the grip.
Drive hardwood dowels in with glue.
Cut dowels after the glue dries.
Sand grip back flush.
Most people then use a spray can finish.
Any new stock you find will crack in the same grip area.
You will not have any more problems if the stock you have is properly repaired.
A internet search will reveal many tutorials on this type grip repair.

Re: anschutz superair 2002

Posted: Fri Jul 31, 2020 3:44 pm
by acorneau
Check in with Joe Hein at Elite Shooting Sports.

He services these air rifles and just might have a lead on a spare stock looking for a home. (He was my source for a replacement valve, good guy to work with.)

https://www.eliteshootingsport.com