anschutz superair 2002

Pumps, pre-charged, springers and everything else pneumatic.
Post Reply
hondayamaha
B Poster
B Poster
Posts: 12
Joined: Sun Mar 01, 2015 7:24 pm

anschutz superair 2002

Post by hondayamaha »

just acquired a 2002 superair. IT has a cracked stock in the grid area any idea on a replacement stock?Does anything innerchange any help would be wonderfull.

atomicbrh
Master Poster
Master Poster
Posts: 1154
Joined: Sat Apr 15, 2006 7:24 pm
Location: Rural Mississippi

Re: anschutz superair 2002

Post by atomicbrh »

Replacement stocks are usually more than what you paid for the rifle.
Drill the grip.
Drive hardwood dowels in with glue.
Cut dowels after the glue dries.
Sand grip back flush.
Most people then use a spray can finish.
Any new stock you find will crack in the same grip area.
You will not have any more problems if the stock you have is properly repaired.
A internet search will reveal many tutorials on this type grip repair.

User avatar
acorneau
AAA Poster
AAA Poster
Posts: 623
Joined: Sun Feb 22, 2015 12:12 pm
Location: Houston

Re: anschutz superair 2002

Post by acorneau »

Check in with Joe Hein at Elite Shooting Sports.

He services these air rifles and just might have a lead on a spare stock looking for a home. (He was my source for a replacement valve, good guy to work with.)

https://www.eliteshootingsport.com
Allen Corneau

Post Reply