loading the 260 rem

More expensive to feed, but worth it.
Post Reply
RAMBUSTER40

loading the 260 rem

Post by RAMBUSTER40 »

DOES ANYONE HAVE A GOOD RECEIPE USING 139 LAPUA'S IN THE 260 REM. ANTHONY G
Troy G
A Poster
A Poster
Posts: 116
Joined: Fri Nov 18, 2005 8:52 am

Post by Troy G »

I am using 42 grs of IMR-4831 for 2750 fps from a 26" 1/8 twist barrel. This load is far from hot but it gets the job done without beating me up. I would certainly go to H-4350 because of this powder being less temperature sensitive. I am just about through my last 8 pounds of IMR-4831 and if the barrel survives I will be trying to develop a load with h-4350.
dave imas
A Poster
A Poster
Posts: 234
Joined: Fri Nov 18, 2005 2:41 pm
Location: olympia, washington
Contact:

Post by dave imas »

39 grains N150. sorry!!! my first post was for my 6.5x55
Last edited by dave imas on Wed Dec 07, 2005 11:12 am, edited 1 time in total.
Joaquin B.

Post by Joaquin B. »

My rifle likes 39.8 grs. of H4350, in Lapua cases using Federal 210 Match primers.

Joaquin B.
Post Reply