6.5x47 Loads for HP Silhouette
- Ferret Master
- B Poster
- Posts: 63
- Joined: Tue Mar 22, 2011 6:14 pm
6.5x47 Loads for HP Silhouette
I am looking for some loads in the 2700-2800 FPS range for 123's and about 2550-2600 range for 139's or 142's. Have been surprised by the relative lack of load data for this cartridge. Most of what I have found are maximum loads. Please include the primer used.
Thanks in advance,
Ferret Master
Thanks in advance,
Ferret Master
- Bob259
- Uber Master Poster
- Posts: 4337
- Joined: Sat Jul 15, 2006 7:16 pm
- Location: Phoenix, AZ
Re: 6.5x47 Loads for HP Silhouette
Start with about 34-35gr Varget, using 36 gr for the 107's and will be doing some testing with the 123's later this summer.
F Troop - Southwest Outpost
Proud Member of the Ram Slammers US Division (Two Bob)
Proud Member of the Ram Slammers US Division (Two Bob)
-
- Uber Master Poster
- Posts: 2746
- Joined: Wed Apr 12, 2006 2:34 pm
- Location: Casa Grande, AZ
Re: 6.5x47 Loads for HP Silhouette
Using Varget and small magnum primers in my 6.5x47;
bullet -powder-velocity
107 ----34 --- 2795 - first 3 animals
123----39------2950 - 1,000 and 1,200 yard load
142----37------2655 - rams
You might want to start with less powder and work up to what you want but there is some info. Non-molly bullets.
bullet -powder-velocity
107 ----34 --- 2795 - first 3 animals
123----39------2950 - 1,000 and 1,200 yard load
142----37------2655 - rams
You might want to start with less powder and work up to what you want but there is some info. Non-molly bullets.