CZ 457 Varmint Precision Trainer Question
-
- Master Poster
- Posts: 1293
- Joined: Sat Apr 15, 2006 7:24 pm
- Location: Rural Mississippi
CZ 457 Varmint Precision Trainer Question
It is just a matter of time before someone asks this question so I will ask for them.
Is the CZ 457 Varmint Precision Trainer Camo in the Manners stock meet all rules for smallbore Hunter rifle?
Will it make weight?
Does the stock fit both Hunter and Standard rifle dimensions in the rules?
Does the barrel have enough taper to it to meet Hunter requirements?
Is the CZ 457 Varmint Precision Trainer Camo in the Manners stock meet all rules for smallbore Hunter rifle?
Will it make weight?
Does the stock fit both Hunter and Standard rifle dimensions in the rules?
Does the barrel have enough taper to it to meet Hunter requirements?
- Sporty
- AA Poster
- Posts: 329
- Joined: Sun Oct 12, 2014 4:05 pm
- Location: NC
Re: CZ 457 Varmint Precision Trainer Question
If it's tapered then it should be enough. I'm not aware of a "degree of taper" requirement.
Does this picture help answer your question about dimensions?
Does this picture help answer your question about dimensions?
You do not have the required permissions to view the files attached to this post.
-Charlie Meli
Match director @ Piedmont Gun Club, Rutherdfordton, NC
Match director @ Piedmont Gun Club, Rutherdfordton, NC
-
- B Poster
- Posts: 78
- Joined: Sat Oct 26, 2013 8:46 pm
- Location: Vancouver Island, Canada
Re: CZ 457 Varmint Precision Trainer Question
Thanks for posting the picture of the dimensions.
I've heard about a box-jig used for inspecting rifles at big matches - does any one have dimensions/instructions to make one of those jigs?
Thanks,
-Steve
I've heard about a box-jig used for inspecting rifles at big matches - does any one have dimensions/instructions to make one of those jigs?
Thanks,
-Steve
-
- Master Poster
- Posts: 1293
- Joined: Sat Apr 15, 2006 7:24 pm
- Location: Rural Mississippi
Re: CZ 457 Varmint Precision Trainer Question
Charlie, That diagram is not current. The requirement of a maximum of 7 inches from toe to centerline of bore was removed several years ago.
I do not have a CZ 457 in the Manners stock to compare. That is why I asked the question. I have never seen that diagram before and did not know it existed. That diagram is not in the NRA rulebook. There are so many things hidden on the NRA website and I have to read this forum to find out about them. I wonder if there is a similar diagram for Hunter Rifle hiding in the recesses of the NRA website?
I do not have a CZ 457 in the Manners stock to compare. That is why I asked the question. I have never seen that diagram before and did not know it existed. That diagram is not in the NRA rulebook. There are so many things hidden on the NRA website and I have to read this forum to find out about them. I wonder if there is a similar diagram for Hunter Rifle hiding in the recesses of the NRA website?
- Sporty
- AA Poster
- Posts: 329
- Joined: Sun Oct 12, 2014 4:05 pm
- Location: NC
Re: CZ 457 Varmint Precision Trainer Question
Thanks for the update. Are there any other obsolete dimensions?
-Charlie Meli
Match director @ Piedmont Gun Club, Rutherdfordton, NC
Match director @ Piedmont Gun Club, Rutherdfordton, NC
-
- Master Poster
- Posts: 1293
- Joined: Sat Apr 15, 2006 7:24 pm
- Location: Rural Mississippi
Re: CZ 457 Varmint Precision Trainer Question
Only one minor thing. Rule 3.1 section f says 1 and 5/16 inches is the maximum that the trigger guard can extend below the bottom line of the forearm instead of the 1 and 3/8 inches on the diagram. That is only a 1/16 of an inch difference. Hard to measure a 1/16 inch with what most juries have with them at the range. 1/16 inch is being too picky but wonder why the discrepancy? Also I am wondering why they did not put the 30 inch maximum barrel length on the same diagram. It never made any sense to me that a hunter stock could dimensionally not meet the heavy rifle rules.
Edit: Oh wait! The last sentence in 3.1.1(c) says "Dimensions may not exceed those described in 3.1(d). I am glad they added that but when was it added?
Edit: Oh wait! The last sentence in 3.1.1(c) says "Dimensions may not exceed those described in 3.1(d). I am glad they added that but when was it added?
-
- Master Poster
- Posts: 1293
- Joined: Sat Apr 15, 2006 7:24 pm
- Location: Rural Mississippi
Re: CZ 457 Varmint Precision Trainer Question
The other strange thing is the Hunter rifle must have a functional safety but the heavy rifle does not.